Huawei E620 data card & USSD commands

[zaphod]

Version 11.16.09.09.11 can be found at:

http://kundeservice.tdc.dk/erhverv/m...q.php?id=10898

I have downloaded & installed it. And USSD command on the E620 card work at last !!!!!

I have not experience any problems so far. However use it at your own risk.

[Sselmrah]

@Zaphod: you are my hero! i d/l'ed the link and installed it while holding my breath, but everything went smoothly and I can now use ussd commands for the first time!!! thank you, thank you!
ps. if you pm me your name I'll name my first-born after you!

[fismail]

did the upgrade , all working fine , i notice the indicator light on the card is now light blue when in hsdpa mode , it goes to green sometimes as well for hsdpa , edge and gprs give a dark blue

[MavChat]

I too installed this new firmware... Is it just me or is the communication between the datacard and the dashboard faster? I haven't installed the new dashboard from huawei yet will download and install tonight.

I will also test the ussd commands tonight. I have been a bit busy with the 12 days website in my signature.

[MobileAllOver]

http://ravenclaw.opasia.dk/pub/tdc/e...20firmware.exe

[aws]

right so i been looking for a way to do all this for AGES... did everything in the above posts etc aswell... problemo is... i HATE the mtn software for the card.. its chunky so i make use of the huawei mobile partner software.

anyways.. everytime i want to load talk time to buy a bundle i need to dial 555 listen to the promps enter voucher pin disconnect dial 55 listen to .... for each voucher pin (normaly around 3 to 4). i do this twice a month.... have to redial caus eif i dont the software errors out and mtn recieves an invalid key used so locks the recharge feature (had to call in to get them to unblock it a few times till i realised where the issue sat)

so today read all the threads on the topic to get a solution... enter my genius google searching capabilities (LMAO jokes just got lucky i guess)

http://www.google.com/search?num=30&...N+&btnG=Search

the link i would like to bring your attention to..... *drum roll*

http://www.nerve.org.za/e620tool/

damn thing works to send USSD commands etc. its super small to... hmm im surprised mtn havent included the feature in their software... if somone can build it into a 92KB exe... im sure mtn's 34mb when installed could contain it :P

wish mtn would make a 4gig bundle to or better yet take away the 30 day waiting thing to load the next bundle.. i have 2 sim cards already

hmmmm to the mtn dude.... (thats for all the smiley spam you posted :P)

great stuff ginggs

hmmm i know its an old topic etc but i couldnt find this details anywhere else

[SecretCode]

...

great stuff ginggs

hmmm i know its an old topic etc but i couldnt find this details anywhere else

The official thread is here - but yes, it's a great tool!

[gerardhs]

My e620 MTN Datcard keeps hanging from time to time, seems it could be a faulty datacard. Anyone know of a reset command for use in Hyperterminal? Its a real humbug when your trying to download a huge secure music file from say Beatport. I currently have to reboot my PC to get it operational again.

[ginggs]

Anyone know of a reset command for use in Hyperterminal?

Send AT+CFUN=4 then AT+CFUN=6 to reset your modem.

[whitestone]

Has anyone successfully received USSD response via Huawei E270 ?
I have installed the latest firmware (11.306.07.03.00) for E270but still receive OK only.

My ATI result

Manufacturer : Huawei
Model : E270
Revision: 11.306.07.03.00
IMEI: 354XXXXXXXXXXX619
+GCAP: +CGSM,+DS,+ES


AT+COPS?
+COPS: 0,2,"52501",2

OK


Appreciate your help.

[ginggs]

Has anyone successfully received USSD response via Huawei E270 ?

What does your AT+CUSD command look like?

I have installed the latest firmware (11.306.07.03.00) for E270but still receive OK only.

Can you a provide link for the firmware update please?

Two quick questions, does the E270 work at all with MDMA and does the USSD function work?

Welcome to MyBroadband!

[whitestone]

What does your AT+CUSD command look like?

AT+CUSD=1,"*147#",15

Can you a provide link for the firmware update please?

I got the updated firmware from here

http://www.starhub.com/online/maxmob...0_Firmware.zip

Yes the USSD function work if I use the SIM with my mobile phone.

Thank you.

[Gurutuban]

I just want to find out how to get register a network using Mobile Partners on my Huawei E1550 USB Modem. It worked fine initially, but then I used a Vodacom card and went into network, manually register, it picked up all the networks in SA, I clicked Vodacom (3G), now I cant use my MTN Card on it.
Initially it was locked on UK 3G, but I unlocked it and I have the NCK and Flash Code, but when I try to unlock again, it say already unlocked.
Could you tell me why or what to do to make it pick up all networks aagain....
Thanks in advance....
KC

Launch Mobile Partner.
In Tools select Options
Select Network, below Profile Management
In the Network Type droplist select WCDMA preferred
In the Bands select All Bands

[the1ne]

What are those shades hiding? Did you just go and flick the switch?

I do not believe this:

AT+COPS?
+COPS: 0,2,"65510",0

OK
AT+CUSD=1,"*123#",15
OK

+CUSD: 1,"MTN Menu :
(Menu browsing is free)
1-Phone Setup
2-MTNLoaded
3-Mzines
4-Get the 411
5-Ringtones
6-Greeting Cards
0-Help

",0

AT+CUSD=1,"0",15                
OK  

+CUSD: 1,"-Help-                
This menu enables you to set up your phone for MMS, WAP, etc. You can download JamCam images and other content. Menu sessions are max 120 sec.                                                              

9-Back",0         

AT+CUSD=1,"9",15                
OK  

+CUSD: 1,"MTN Menu :
(Menu browsing is free)
1-Phone Setup
2-MTNLoaded
3-Mzines
4-Get the 411
5-Ringtones
6-Greeting Cards
0-Help

",0

AT+CUSD=2
OK

AT+CUSD=1,"*123*888#",15                        
OK  

+CUSD: 0,"Yello! Your MSISDN is 2783*******",0

MSISDN number changed to protect the innocent.

Hi there. I am busy trying to follow this example but I keep getting errors. Can you please help me with it.

[ginggs]

Hi there. I am busy trying to follow this example but I keep getting errors. Can you please help me with it.

What make and model is your modem?