+ Reply to Thread
Results 1 to 5 of 5

Thread: Help Please! Problem with dissconnecting modem router.

  1. #1

    Help Please! Problem with dissconnecting modem router.

    Hi i have a problem with my micronet router, it dissconects sometimes 5 times in an hour.

    It is the model SP3367A and when it dissconects the ADSL light on the router starts flashing, and will reconnect in about 30 secs.

    Any help will be greatly appreciated, as i have no idea what the frick to do...

    Thanks!

    Oh here is the log if it helps in any fashion.

    11/21/2008 17:8:10> Accept() fail
    11/21/2008 17:8:10> Accept() fail
    11/21/2008 18:11:28> MPOA Link Down
    11/21/2008 18:11:28> SNMP TRAP 2: link down
    11/21/2008 18:11:28> netMakeChannDial: err=-3001 rn_p=804b79b4
    11/21/2008 18:11:58> Last errorlog repeat 409 Times
    11/21/2008 18:11:58> MPOA Link Up
    11/21/2008 18:12:0> ppp_ready: ch:804cdfe4, iface:8044c4a4
    11/21/2008 18:12:0> SNMP TRAP 3: link up
    11/21/2008 18:12:0> Accept() fail
    11/21/2008 18:12:0> Accept() fail
    11/21/2008 18:27:0> MPOA Link Down
    11/21/2008 18:27:0> SNMP TRAP 2: link down
    11/21/2008 18:27:30> MPOA Link Up
    11/21/2008 18:27:33> ppp_ready: ch:804cdfe4, iface:8044c4a4
    11/21/2008 18:27:33> SNMP TRAP 3: link up
    11/21/2008 18:27:33> Accept() fail
    11/21/2008 18:27:33> Accept() fail
    11/21/2008 18:45:33> MPOA Link Down
    11/21/2008 18:45:33> SNMP TRAP 2: link down
    11/21/2008 18:45:33> netMakeChannDial: err=-3001 rn_p=804b79b4
    11/21/2008 18:46:3> Last errorlog repeat 309 Times
    11/21/2008 18:46:3> MPOA Link Up
    11/21/2008 18:46:15> ppp_ready: ch:804cdfe4, iface:8044c4a4
    11/21/2008 18:46:15> SNMP TRAP 3: link up
    11/21/2008 18:46:15> Accept() fail
    11/21/2008 18:46:15> Accept() fail
    11/21/2008 18:57:4> MPOA Link Down
    11/21/2008 18:57:4> SNMP TRAP 2: link down
    11/21/2008 18:57:4> netMakeChannDial: err=-3001 rn_p=804b79b4
    11/21/2008 18:57:34> Last errorlog repeat 307 Times
    11/21/2008 18:57:34> MPOA Link Up
    11/21/2008 18:57:36> ppp_ready: ch:804cdfe4, iface:8044c4a4
    11/21/2008 18:57:36> SNMP TRAP 3: link up
    11/21/2008 18:57:36> Accept() fail
    11/21/2008 18:57:36> Accept() fail
    11/21/2008 19:0:31> MPOA Link Down
    11/21/2008 19:0:31> SNMP TRAP 2: link down
    11/21/2008 19:0:31> netMakeChannDial: err=-3001 rn_p=804b79b4
    11/21/2008 19:1:2> Last errorlog repeat 291 Times
    11/21/2008 19:1:2> MPOA Link Up
    11/21/2008 19:1:14> ppp_ready: ch:804cdfe4, iface:8044c4a4
    11/21/2008 19:1:14> SNMP TRAP 3: link up
    11/21/2008 19:1:14> Accept() fail
    11/21/2008 19:1:14> Accept() fail

  2. #2
    Super Grandmaster
    Join Date
    Aug 2006
    Location
    Port Shepstone, KZN, RSA, EARTH
    Posts
    7,866

    We had the same problem here after the recent rains [check if the phone connected to the line is noisy] - you'll have to phone Telkom to send a technician check the line.

  3. #3

    i used to have this problem, with my microcom router, until i made pppoe connections, and used route sentry to dial up, it actually went away.

    i think there could be a problem maybe with the firmware drivers on it running in router mode, rather than in modem mode,

    but this is just my guess, try switching it over to pppoe, and just dial up everytime you start your pc. its take like what 2 secs to do that anyways, just double click,,,lol,,,,should sort it.

  4. #4
    Senior Member
    Join Date
    Sep 2008
    Location
    In front of my PC...............
    Posts
    152

    Just make sure your other devices, FAX, cordless phone etc. are connected via filters. the line noise sometimes drops the connections.

  5. #5
    Super Grandmaster
    Join Date
    Dec 2004
    Location
    I exist only in my own mind ...
    Posts
    6,846

    You MUST have all other devices connected to your telkom line connect through a microfilter.
    I'm willing to admit that I may not always be right, but I am never wrong

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts