Beware of Dany Tech company

V

Vincent_Thorn

Well-Known Member
Joined
Sep 15, 2008
Messages
289
Lately I've bought PSU 400W from Dany. It was too noisy (cheapest chineese fan), I tore warranty sticker and opened the case. OMG!! Inside was a cr@p from 20-th century! Board was dirty, old and when I looked at back side it was full of manual soldering! And this item was sold as a new with warranty sticker!
So if you care about your main-board, beware of that refurbished piece of sh.... handcraft.

This is how it looks:
Dany_crap.webp


PS
Some years ago their wireless keyboard also "surprised" me with terrible typing - it had delays which make impossible any work! (despite the fact transmitter and receiver was in 50-100 cm. away on sight line)
 
Last edited:
tRoN

tRoN

Executive Member
Joined
Mar 13, 2007
Messages
6,739
Vincent_Thorn said:
Lately I've bought PSU 400W from Dany. It was too noisy (cheapest chineese fan), I tore warranty sticker and opened the case. OMG!! Inside was a cr@p from 20-th century! Board was dirty, old and when I looked at back side it was full of manual soldering! And this item was sold as a new with warranty sticker!
So if you care about your main-board, beware of that refurbished piece of sh.... handcraft.

This is how it looks:
Dany_crap.webp


PS
Some years ago their wireless keyboard also "surprised" me with terrible typing - it had delays which make impossible any work! (despite the fact transmitter and receiver was in 50-100 cm. away on sight line)
Click to expand...

Must have been refurbished sold as new.
Looks like cheap Chinese cr@p on the outside too!
 
V

Vincent_Thorn

Well-Known Member
Joined
Sep 15, 2008
Messages
289
@sajunky: not everything can be restored to the "new look". And nobody worried about look since customer sure he bought new device and don't open it.

@jacksback: yep. After I visited their site (http://danytech.com/pages/about-us) I found their chineese roots :) Pity, but time of thoughts "chineese = rubbish" didn't pass.
 
S

sajunky

Honorary Master
Joined
Nov 1, 2010
Messages
13,124
Vincent_Thorn said:
@sajunky: not everything can be restored to the "new look".
Click to expand...
Surely, can't you remove dust?
Is obvious that during any refurbishing process dust should be removed, as:
- it obstruct cooling, cause components overheating
- it speeds up deterioration of fan bearings due to vibrations
- it can generate sparks in high voltage circuits
- It exposes customer to the germs of the previous user
I saw living cockroaches and its eggs in such equipment (a nice, warm place to hide). :)
 
Last edited:
V

Vincent_Thorn

Well-Known Member
Joined
Sep 15, 2008
Messages
289
sajunky said:
Surely, can't you remove dust?
Click to expand...

It wasn't dust, huh! I saw some boards even after 20 years look nice, but this one looked like some brown sh*t spread across and no any vacuum could help. I'm 100% sure it was faulty unit, refurbished at Dany - dirty business :)
 
W

Willie Trombone

Honorary Master
Joined
Jul 18, 2008
Messages
60,038
Yeah, these things find their way through Durban port most likely... with a bit of dosh to sort the customs people.
 
S

Space_Chief

Honorary Master
Joined
Aug 22, 2012
Messages
12,950
iaywtimnbe said:
Yeah, these things find their way through Durban port most likely... with a bit of dosh to sort the customs people.
Click to expand...

Dany Tech have an agent in JHB. They also have one in California, Georgia (the country), KSA, India, HK and are looking for distributors in Holland, Japan, Germany, etc.

Quality is our strength; our Quality Control department is always proactive in making sure that we provide the best quality, reliability and service that our customers deserve.

Dany believe that quality is not a one time achievement, Dany Technologies aims to provide the best in products and services, we are here to stay, with the support of our partners we will achieve great success together.
Click to expand...

http://www.danytech.com/pages/about-us
 
You must log in or register to reply here.
Top