Cell-C E1820/E1752 Dashboard Software "WCDMA only" [SOLVED]

[marlboro]

Is there a way to force "WCDMA only" under the Cell C software, instead of "WCDMA preffered" (registry entry may be) or I have to use MDMA for such purpose?

UPDATE
The post below details the "unofficial" fix. Cell C have subsequently released a dashboard which allows you to select "WCDMA only"

Download from: http://www.cellc.co.za/internet/drivers/downloads

 

[Tun@]

Cell C Unofficial Dash Fix - Fixes where there is no option to select "WCDMA Preferred" or "WCDMA Only" from the network type drop-down box

I got sick of it & managed to patch it. If you would like your Network Type box to work follow below:

EDIT: Simpler way of doing it listed at the bottom of the Post,These also have the newer drivers mentioned in Post #8 already included

[-]Download the needed files from here - http://www.mediafire.com/?nj4h9ap32a48a40 [/-]


[-]1) Close Cell C Dash[/-]



[-]2) Copy the "NetSettingPlugin Folder" (NOTE: THE WHOLE FOLDER named NetSettingPlugin ) & paste it into the[/-]

[-]For Win 32bit: C:/Program Files/Cell C/PLUGINS folder......select copy & replace when prompted x 2.[/-]
OR
[-]For Win 64bit: C:/Program Files(x86)/Cell C/PLUGINS folder....select copy & replace when prompted x 2.[/-]



[-]3)Copy the "NetSettingPlugin.dll" File & paste it into:[/-]

[-]For Win 32bit: C:/Program Files/CellC ......select copy & replace when prompted.[/-]
OR
[-]For Win 64bit: C:/Program Files (x86)/CellC ......select copy & replace when prompted[/-].



[-]4) Open Cell C Dash & it should now have the Network Types no longer greyed out & the options to choose from available there.[/-]
.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Simpler options:
1)Installer just for PC:_ Remove stick/Uninstall Cell C/Reboot/run the setup.exe/Plug stick back in.
http://www.mediafire.com/?xvf91lf0fbt9fcy
or
http://rapidshare.com/files/444933202/Cell-C_Unofficial_For_PC.zip

2)Installer to Stick: - Will overwrite the original Dash on the stick & replace it with the modded one.
http://www.mediafire.com/?m0zbymeitjgvzss
or
http://rapidshare.com/files/443742607/Cell_C_Unoffical_to_Stick.zip

Enjoy!

 

[Tun@]

IMG is off on this thread so picture of it working here
http://mybroadband.co.za/vb/attachment.php?attachmentid=6791&d=1291280030

 

[ginggs]

I got sick of it & managed to patch it.

Nice trick, thanks!

 

[Tun@]

Also some little bit newer drivers if anyone's interested, I can confirm they work for E1820, should be OK for E1752 but i haven't tested.

Cell C Dash is working off V 4.17 Drivers
Here are some V 4.20 ones http://www.mediafire.com/?6d38kh9oc8c9ose

Release notes from 4.17 forward

Version 4.17.00.00
Remove BDA driver

Version 4.17.01.00
Improve ACM data transfer performance
Fix the issue that can't awake from hibernate on some special laptops.

Version 4.18.00.00
Add BDA driver
Fix a BSOD with modem in verifier mode.
Fix an issue that there is some sound after from S3/S4 with FUJITSU LIFEBOOK.
Fix the issue after unload the fake driver.
Fix the issue that the diag or pcui interface is dead after resume from S3/S4.

Version 4.19.00.00
Fix a BSOD with fake in verifier mode.
PCUI port can not communicate.

Version 4.20.00.00
Fix an issue that ECM driver can't be loaded.

Version 4.20.01.00
Fix an issue of driver setup.

Version 4.20.02.00
Fix an issue that the ports can not disappear sometimes.

Version 4.20.03.00
Fix the BSOD issue when download big file.

Version 4.20.05.00
Fix the issue that WWAN subnetmask error.
Fix a bug of home provider name queried.
Fix a bug of packet service detached.
Modify the information about the NDIS link speed.
Add PID 1C1C in ew_jubusenum.inf.

Version 4.20.11.00
Fix an issue that WWAN driver can't be released.

1)Close Cell C dash but leave modem inserted (its not writing anything to the stick but keeps the drivers loaded)

Note: For Win 64bit OS you need to look in Crogram Files (x86) instead of Crogram Files

2)Go to C:/Program Files/CellC and rename the "Driver" folder to "DriverOld"

3) Copy & paste the downloaded "Driver" file into C:/Program Files/CellC

3)Open the Driver folder, Right click on "DriverSetup.exe" & select "Run as Administator"

4) Wait until the Dash opens up again & your good to go.

Have run on them for a few days on Win7 64bit & having no issues




Cell C would you like to put some up-to-date Win7 Drivers on your site please?

 

[marlboro]

Also some little bit newer drivers if anyone's interested, I can confirm they work for E1820, should be OK for E1752 but i haven't tested.

Cell C Dash is working off V 4.17 Drivers
Here are some V 4.20 ones http://www.mediafire.com/?6d38kh9oc8c9ose

Release notes from 4.17 forward




1)Close Cell C dash

2)Go to C:/Program Files/CellC and rename the "Driver" folder to "DriverOld"

3) Copy & paste the downloaded "Driver" file into C:/Program Files/CellC

3)Open the Driver folder, Right click on "DriverSetup.exe" & select "Run as Administator"

4) Wait until the Dash opens up again & your good to go.

Have run on them for a few days on Win7 64bit & having no issues




Cell C would you like to put some up-to-date Win7 Drivers on your site please?

Do you see any difference with the newer driver?

 

[Tun@]

Do you see any difference with the newer driver?

Once i force-fed my modem good signal its worked fine so no i don't see any differance,think that's what you were asking or were you meaning in Device Manager?

 

[marlboro]

Once i force-fed my modem good signal its worked fine so no i don't see any differance,think that's what you were asking or were you meaning in Device Manager?

Yes, thanks. That's what I was asking.

 

[Antonf]

I got sick of it & managed to patch it.

Good work, thanks a LOT!!

 

[ryan_black13]

Also some little bit newer drivers if anyone's interested, I can confirm they work for E1820, should be OK for E1752 but i haven't tested.

Cell C Dash is working off V 4.17 Drivers
Here are some V 4.20 ones http://www.mediafire.com/?6d38kh9oc8c9ose

Release notes from 4.17 forward




1)Close Cell C dash

2)Go to C:/Program Files/CellC and rename the "Driver" folder to "DriverOld"

3) Copy & paste the downloaded "Driver" file into C:/Program Files/CellC

3)Open the Driver folder, Right click on "DriverSetup.exe" & select "Run as Administator"

4) Wait until the Dash opens up again & your good to go.

Have run on them for a few days on Win7 64bit & having no issues




Cell C would you like to put some up-to-date Win7 Drivers on your site please?

I am having trouble installing the driver on Win 7. I followed all the steps. After run as administrator, It takes about 4 min, then a message pops up saying something about the driver not being installed correctly, do I want to install using the recommended settings? I clicked yes, and nothing has happened. Should I restart and try again?

 

[Tun@]

just try "run as admin" again & on the DriverSetup.exe.

 

[ryan_black13]

just try "run as admin" again & on the DriverSetup.exe.

Iv done that now (about 2min ago). Waiting to see what happens...

 

[ryan_black13]

Iv done that now (about 2min ago). Waiting to see what happens...

Ok reading again, maybe I made a mistake. Iv got windows 7 64bit. Should I put the driver folder in C:/Program Files/CellC or the (x86) folder?

Oh, there isn't a cell c folder in C:/Program Files/CellC

 

[ryan_black13]

Ok still waiting

 

[ryan_black13]

Should the dongle be inserted into the usb during this process? Mine isn't

 

[Tun@]

I'm also w7 64bit & Cell C installed by default to the C:/Program Files (x86)
You put the "Driver" folder back into the Cell C folder.
Same place where i said to rename the current one "DriverOld"
I would expect the (x86) unless you specified differant when you installed.

 

[ryan_black13]

I'm also w7 64bit & Cell C installed by default to the C:/Program Files (x86)
You put the "Driver" folder back into the Cell C folder.
Same place where i said to rename the current one "DriverOld"
I would expect the (x86) unless you specified differant when you installed.

Yes it is in the C:/Program files (x86) like you said

 

[ryan_black13]

What size is the install text document supposed to be? mine is 12kb

 

[Tun@]

Should the dongle be inserted into the usb during this process? Mine isn't

Leave the dongle in before you start - it writes nothing to it.

The DriverSetup.exe is 320Kb

 

[ryan_black13]

This is what the install text document says at the end:

Info : Copy dll file OK.
Info : Find device, ID: huawei_enum_vbus...
Info : SetupDiCallClassInstaller DIF_REMOVE SUC
Info : Remove the virtual bus always!
Info : Remove device register Info, END...
Info : Remove device register Info, END...
Info : C:\Program Files (x86)\Cell C\Driver\Driver.01\X64\ew_jubusenum.inf installer success.
Excute file: C:\Program Files (x86)\Cell C\Driver\..\AutoRun\AutoRunSetup.exe
Info : File not found, return.
SUC: end...