Cool Ideas Fibre ISP – Feedback Thread 2

Status
Not open for further replies.

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
Not great. Very inconsistent, just ran these now.

View attachment 757062 View attachment 757064
View attachment 757068 View attachment 757072

Also, if you look further up on this page at DJZassie iperf at 100M he has 0% loss and mine is 1%? See spoiler below.
Code:
iperf3 -u -R -b 100M -p 17001 -c ter-cpt-iperf-1.cisp.co.za -O 1
Connecting to host ter-cpt-iperf-1.cisp.co.za, port 17001
Reverse mode, remote host ter-cpt-iperf-1.cisp.co.za is sending
[ 4] local 192.168.1.199 port 57172 connected to 154.0.15.181 port 17001
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-1.00 sec 12.1 MBytes 102 Mbits/sec 0.123 ms 34/1588 (2.1%) (omitted)
[ 4] 0.00-1.00 sec 11.9 MBytes 99.9 Mbits/sec 0.179 ms 0/1525 (0%)
[ 4] 1.00-2.00 sec 11.9 MBytes 100 Mbits/sec 0.176 ms 0/1526 (0%)
[ 4] 2.00-3.00 sec 11.8 MBytes 99.1 Mbits/sec 0.132 ms 14/1526 (0.92%)
[ 4] 3.00-4.00 sec 11.9 MBytes 99.8 Mbits/sec 0.087 ms 2/1525 (0.13%)
[ 4] 4.00-5.00 sec 11.9 MBytes 100 Mbits/sec 0.129 ms 18/1527 (1.2%)
[ 4] 5.00-6.00 sec 11.9 MBytes 99.9 Mbits/sec 0.151 ms 0/1525 (0%)
[ 4] 6.00-7.00 sec 11.9 MBytes 99.9 Mbits/sec 0.159 ms 1/1525 (0.066%)
[ 4] 7.00-8.00 sec 11.0 MBytes 92.1 Mbits/sec 0.203 ms 121/1527 (7.9%)
[ 4] 8.00-9.00 sec 11.9 MBytes 100 Mbits/sec 0.168 ms 0/1526 (0%)
[ 4] 9.00-10.00 sec 11.9 MBytes 99.9 Mbits/sec 0.141 ms 1/1526 (0.066%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-10.00 sec 120 MBytes 100 Mbits/sec 0.132 ms 157/15260 (1%)
[ 4] Sent 15260 datagrams
[SUM] 0.0-10.0 sec 17 datagrams received out-of-order

iperf3 -u -R -b 100M -p 17001 -c lnms.cisp.co.za -O 1
Connecting to host lnms.cisp.co.za, port 17001
Reverse mode, remote host lnms.cisp.co.za is sending
[ 4] local 192.168.1.199 port 65004 connected to 154.0.1.254 port 17001
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-1.00 sec 12.0 MBytes 101 Mbits/sec 0.123 ms 44/1585 (2.8%) (omitted)
[ 4] 0.00-1.00 sec 11.9 MBytes 99.9 Mbits/sec 0.122 ms 0/1527 (0%)
[ 4] 1.00-2.00 sec 11.5 MBytes 96.6 Mbits/sec 0.220 ms 55/1526 (3.6%)
[ 4] 2.00-3.00 sec 11.9 MBytes 99.9 Mbits/sec 0.114 ms 2/1526 (0.13%)
[ 4] 3.00-4.00 sec 11.9 MBytes 99.9 Mbits/sec 0.108 ms 0/1525 (0%)
[ 4] 4.00-5.00 sec 11.9 MBytes 100 Mbits/sec 0.171 ms 0/1527 (0%)
[ 4] 5.00-6.00 sec 11.7 MBytes 98.2 Mbits/sec 0.220 ms 27/1526 (1.8%)
[ 4] 6.00-7.00 sec 11.9 MBytes 99.8 Mbits/sec 0.135 ms 4/1526 (0.26%)
[ 4] 7.00-8.00 sec 11.8 MBytes 99.0 Mbits/sec 0.147 ms 14/1524 (0.92%)
[ 4] 8.00-9.00 sec 11.7 MBytes 98.4 Mbits/sec 0.132 ms 24/1526 (1.6%)
[ 4] 9.00-10.00 sec 11.9 MBytes 100 Mbits/sec 0.284 ms 0/1526 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-10.00 sec 120 MBytes 101 Mbits/sec 0.181 ms 126/15286 (0.82%)
[ 4] Sent 15286 datagrams
And what do iperfs to queen look like? Also have you tried using your mobile as a comparison?
 

CrypticZA

Expert Member
Joined
Sep 21, 2019
Messages
1,859
Which game?
Overwatch, it's not bad or anything, was averaging early last week and last weekend in the lower 160's now i'm averaging around 170, thought maybe HE was used since with HE i got a few ms more but maybe just some congestion somewhere - Dota seems fine 155 to EUW and 17ms local just thought i'd ask
 

jannier

Expert Member
Joined
Jul 31, 2005
Messages
1,812
And what do iperfs to queen look like? Also have you tried using your mobile as a comparison?

@PBCool

What does these iperf's tell you?

Code:
C:\iperf>iperf3 -R -b 200M -p 17001 -c queen.cisp.co.za -u -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 51176 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-1.00   sec  20.7 MBytes   173 Mbits/sec  0.014 ms  2391/17232 (14%)  (omitted)
[  5]   1.00-2.00   sec  23.8 MBytes   200 Mbits/sec  0.009 ms  1/17123 (0.0058%)  (omitted)
[  5]   0.00-1.00   sec  23.8 MBytes   200 Mbits/sec  0.029 ms  0/17124 (0%)
[  5]   1.00-2.00   sec  23.8 MBytes   200 Mbits/sec  0.007 ms  1/17123 (0.0058%)
[  5]   2.00-3.00   sec  23.8 MBytes   200 Mbits/sec  0.011 ms  0/17124 (0%)
[  5]   3.00-4.00   sec  23.8 MBytes   200 Mbits/sec  0.022 ms  0/17123 (0%)
[  5]   4.00-5.00   sec  23.8 MBytes   200 Mbits/sec  0.014 ms  13/17123 (0.076%)
[  5]   5.00-6.00   sec  23.8 MBytes   200 Mbits/sec  0.061 ms  0/17123 (0%)
[  5]   6.00-7.00   sec  23.8 MBytes   200 Mbits/sec  0.020 ms  1/17124 (0.0058%)
[  5]   7.00-8.00   sec  23.8 MBytes   200 Mbits/sec  0.046 ms  0/17122 (0%)
[  5]   8.00-9.00   sec  23.8 MBytes   200 Mbits/sec  0.061 ms  34/17123 (0.2%)
[  5]   9.00-10.00  sec  23.8 MBytes   200 Mbits/sec  0.010 ms  0/17124 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.15  sec   242 MBytes   200 Mbits/sec  0.000 ms  0/173698 (0%)  sender
[SUM]  0.0-10.2 sec  68 datagrams received out-of-order
[  5]   0.00-10.00  sec   238 MBytes   200 Mbits/sec  0.010 ms  49/171233 (0.029%)  receiver

iperf Done.

C:\iperf>iperf3 -R -b 200M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 20370 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-2.00   sec  17.5 MBytes   147 Mbits/sec                  (omitted)
[  5]   0.00-1.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   1.00-2.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   2.00-3.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   3.00-4.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   4.00-5.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   5.00-6.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   6.00-7.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   7.00-8.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   8.00-9.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   9.00-10.00  sec  18.4 MBytes   154 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   186 MBytes   154 Mbits/sec   62             sender
[  5]   0.00-10.00  sec   184 MBytes   154 Mbits/sec                  receiver

iperf Done.

Coreix



 
Last edited:

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
@PBCool

What does these iperf's tell you?

Code:
C:\iperf>iperf3 -R -b 200M -p 17001 -c queen.cisp.co.za -u -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 51176 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 20.7 MBytes 173 Mbits/sec 0.014 ms 2391/17232 (14%) (omitted)
[ 5] 1.00-2.00 sec 23.8 MBytes 200 Mbits/sec 0.009 ms 1/17123 (0.0058%) (omitted)
[ 5] 0.00-1.00 sec 23.8 MBytes 200 Mbits/sec 0.029 ms 0/17124 (0%)
[ 5] 1.00-2.00 sec 23.8 MBytes 200 Mbits/sec 0.007 ms 1/17123 (0.0058%)
[ 5] 2.00-3.00 sec 23.8 MBytes 200 Mbits/sec 0.011 ms 0/17124 (0%)
[ 5] 3.00-4.00 sec 23.8 MBytes 200 Mbits/sec 0.022 ms 0/17123 (0%)
[ 5] 4.00-5.00 sec 23.8 MBytes 200 Mbits/sec 0.014 ms 13/17123 (0.076%)
[ 5] 5.00-6.00 sec 23.8 MBytes 200 Mbits/sec 0.061 ms 0/17123 (0%)
[ 5] 6.00-7.00 sec 23.8 MBytes 200 Mbits/sec 0.020 ms 1/17124 (0.0058%)
[ 5] 7.00-8.00 sec 23.8 MBytes 200 Mbits/sec 0.046 ms 0/17122 (0%)
[ 5] 8.00-9.00 sec 23.8 MBytes 200 Mbits/sec 0.061 ms 34/17123 (0.2%)
[ 5] 9.00-10.00 sec 23.8 MBytes 200 Mbits/sec 0.010 ms 0/17124 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.15 sec 242 MBytes 200 Mbits/sec 0.000 ms 0/173698 (0%) sender
[SUM] 0.0-10.2 sec 68 datagrams received out-of-order
[ 5] 0.00-10.00 sec 238 MBytes 200 Mbits/sec 0.010 ms 49/171233 (0.029%) receiver

iperf Done.

C:\iperf>iperf3 -R -b 200M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 20370 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.77 MBytes 14.8 Mbits/sec (omitted)
[ 5] 1.00-2.00 sec 17.5 MBytes 147 Mbits/sec (omitted)
[ 5] 0.00-1.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 1.00-2.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 2.00-3.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 3.00-4.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 4.00-5.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 5.00-6.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 6.00-7.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 7.00-8.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 8.00-9.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 9.00-10.00 sec 18.4 MBytes 154 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.14 sec 186 MBytes 154 Mbits/sec 62 sender
[ 5] 0.00-10.00 sec 184 MBytes 154 Mbits/sec receiver

iperf Done.

Coreix



IPerfs look fine, are those single and multithreaded tests?
 

jannier

Expert Member
Joined
Jul 31, 2005
Messages
1,812
IPerfs look fine, are those single and multithreaded tests?

Correct, Single is always Orange + Green and Multi is Blue + Purple.

On the second iperf, why did I only get 154Mbits/sec when it was set to 200M?
 

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
Correct, Single is always Orange + Green and Multi is Blue + Purple.

On the second iperf, why did I only get 154Mbits/sec when it was set to 200M?
100Mbps on a single thread is pretty good, second test was UDP. And if you do less than the 154Mbps does it match?
 

jannier

Expert Member
Joined
Jul 31, 2005
Messages
1,812
100Mbps on a single thread is pretty good, second test was UDP. And if you do less than the 154Mbps does it match?

Are you sure?
The first test has a -u that is for UDP test and ran at 200Mbits/sec.
The second test has NO -u, so that was the TCP test at 154Mbits/sec

The second test TCP run at 100M

Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 2871 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-1.00   sec  16.6 MBytes  69.7 Mbits/sec
[  5]   1.00-2.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   2.00-3.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   3.00-4.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   4.00-5.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   5.00-6.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   6.00-7.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   7.00-8.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   8.00-9.00   sec  8.75 MBytes  73.3 Mbits/sec
[  5]   9.00-10.00  sec  15.1 MBytes   127 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   126 MBytes   104 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   124 MBytes   104 Mbits/sec                  receiver

iperf Done.
 

DeatheCore

Senior Member
Joined
Dec 4, 2006
Messages
795
Are you sure?
The first test has a -u that is for UDP test and ran at 200Mbits/sec.
The second test has NO -u, so that was the TCP test at 154Mbits/sec

The second test TCP run at 100M

Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 2871 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-1.00   sec  16.6 MBytes  69.7 Mbits/sec
[  5]   1.00-2.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   2.00-3.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   3.00-4.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   4.00-5.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   5.00-6.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   6.00-7.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   7.00-8.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   8.00-9.00   sec  8.75 MBytes  73.3 Mbits/sec
[  5]   9.00-10.00  sec  15.1 MBytes   127 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   126 MBytes   104 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   124 MBytes   104 Mbits/sec                  receiver

iperf Done.
I think 140-160M is around the limit of a single TCP thread considering 140ms+ etc.
 

jannier

Expert Member
Joined
Jul 31, 2005
Messages
1,812
Are you sure?
The first test has a -u that is for UDP test and ran at 200Mbits/sec.
The second test has NO -u, so that was the TCP test at 154Mbits/sec

The second test TCP run at 100M

Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 2871 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-1.00   sec  16.6 MBytes  69.7 Mbits/sec
[  5]   1.00-2.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   2.00-3.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   3.00-4.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   4.00-5.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   5.00-6.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   6.00-7.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   7.00-8.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   8.00-9.00   sec  8.75 MBytes  73.3 Mbits/sec
[  5]   9.00-10.00  sec  15.1 MBytes   127 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   126 MBytes   104 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   124 MBytes   104 Mbits/sec                  receiver

iperf Done.

This is what I get from Coreix now, Single thread, is the accelerator working correctly for downloading?
Upload is always perfect.

 

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
This is what I get from Coreix now, Single thread, is the accelerator working correctly for downloading?
Upload is always perfect.

If it wasn't then everyone would have the same results :), have you tried different devices?
 

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
Are you sure?
The first test has a -u that is for UDP test and ran at 200Mbits/sec.
The second test has NO -u, so that was the TCP test at 154Mbits/sec

The second test TCP run at 100M

Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 2871 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.77 MBytes 14.8 Mbits/sec (omitted)
[ 5] 1.00-1.00 sec 16.6 MBytes 69.7 Mbits/sec
[ 5] 1.00-2.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 2.00-3.00 sec 11.9 MBytes 99.7 Mbits/sec
[ 5] 3.00-4.00 sec 12.0 MBytes 101 Mbits/sec
[ 5] 4.00-5.00 sec 11.9 MBytes 99.7 Mbits/sec
[ 5] 5.00-6.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 6.00-7.00 sec 12.0 MBytes 101 Mbits/sec
[ 5] 7.00-8.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 8.00-9.00 sec 8.75 MBytes 73.3 Mbits/sec
[ 5] 9.00-10.00 sec 15.1 MBytes 127 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.14 sec 126 MBytes 104 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 124 MBytes 104 Mbits/sec receiver

iperf Done.
Yeah sorry switched them around, it shouldn't cap it should try do the higher throughput and report the results which didn't make it. Maybe an iperf bug.
 

crawler

Expert Member
Joined
Nov 5, 2013
Messages
1,246
Guys were following up with FF will investigate again.
@PBCool ok thanks. So frogfoot might be the issue

Thought so as from the day migration was done from Blitz. I have never seen more than 10 up

And initially they said nothing more than 100 was available. Hopefully the infrastructure can handle it
 

jannier

Expert Member
Joined
Jul 31, 2005
Messages
1,812
Yeah sorry switched them around, it shouldn't cap it should try do the higher throughput and report the results which didn't make it. Maybe an iperf bug.

This is the latest iperf3.7_64 version that Roelf linked to here in the forum some weeks ago.

UDP 300
Code:
C:\iperf>iperf3 -R -b 300M -p 17001 -c queen.cisp.co.za -u -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 62074 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-1.00   sec  30.7 MBytes   258 Mbits/sec  0.025 ms  3613/25697 (14%)  (omitted)
[  5]   1.00-2.00   sec  35.8 MBytes   300 Mbits/sec  0.032 ms  0/25693 (0%)  (omitted)
[  5]   0.00-1.00   sec  35.8 MBytes   300 Mbits/sec  0.010 ms  0/25698 (0%)
[  5]   1.00-2.00   sec  35.8 MBytes   300 Mbits/sec  0.006 ms  0/25682 (0%)
[  5]   2.00-3.00   sec  35.8 MBytes   300 Mbits/sec  0.024 ms  0/25678 (0%)
[  5]   3.00-4.00   sec  35.8 MBytes   300 Mbits/sec  0.014 ms  0/25691 (0%)
[  5]   4.00-5.00   sec  35.7 MBytes   300 Mbits/sec  0.040 ms  0/25671 (0%)
[  5]   5.00-6.00   sec  35.8 MBytes   300 Mbits/sec  0.009 ms  0/25695 (0%)
[  5]   6.00-7.00   sec  35.7 MBytes   300 Mbits/sec  0.007 ms  34/25693 (0.13%)
[  5]   7.00-8.00   sec  35.8 MBytes   300 Mbits/sec  0.008 ms  0/25682 (0%)
[  5]   8.00-9.00   sec  35.7 MBytes   300 Mbits/sec  0.048 ms  0/25669 (0%)
[  5]   9.00-10.00  sec  35.8 MBytes   300 Mbits/sec  0.037 ms  0/25686 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.15  sec   363 MBytes   300 Mbits/sec  0.000 ms  0/260563 (0%)  sender
[SUM]  0.0-10.1 sec  238 datagrams received out-of-order
[  5]   0.00-10.00  sec   358 MBytes   300 Mbits/sec  0.037 ms  34/256844 (0.013%)  receiver

iperf Done.

TCP 300
Code:
C:\iperf>iperf3 -R -b 300M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 11362 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-2.00   sec  17.5 MBytes   147 Mbits/sec                  (omitted)
[  5]   0.00-1.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   1.00-2.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   2.00-3.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   3.00-4.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   4.00-5.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   5.00-6.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   6.00-7.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   7.00-8.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   8.00-9.00   sec  18.4 MBytes   154 Mbits/sec
[  5]   9.00-10.00  sec  18.4 MBytes   154 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   186 MBytes   154 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   184 MBytes   154 Mbits/sec                  receiver

iperf Done.

TCP 100
Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[  5] local 192.168.88.246 port 11396 connected to 62.233.65.195 port 17001
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.77 MBytes  14.8 Mbits/sec                  (omitted)
[  5]   1.00-2.00   sec  17.5 MBytes   147 Mbits/sec                  (omitted)
[  5]   0.00-1.00   sec  16.6 MBytes   139 Mbits/sec
[  5]   1.00-2.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   2.00-3.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   3.00-4.00   sec  12.0 MBytes   101 Mbits/sec
[  5]   4.00-5.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   5.00-6.00   sec  11.9 MBytes  99.8 Mbits/sec
[  5]   6.00-7.00   sec  12.0 MBytes   100 Mbits/sec
[  5]   7.00-8.00   sec  11.9 MBytes  99.7 Mbits/sec
[  5]   8.00-9.00   sec  10.4 MBytes  87.0 Mbits/sec
[  5]   9.00-10.00  sec  13.1 MBytes   110 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   126 MBytes   104 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   123 MBytes   104 Mbits/sec                  receiver

iperf Done.

Coreix Single 7:55


Coreix Single 7:55 (1)


Coreix Single 13:42
 

PBCool

Cool Ideas
Company Rep
Joined
Jan 11, 2016
Messages
10,898
This is the latest iperf3.7_64 version that Roelf linked to here in the forum some weeks ago.

UDP 300
Code:
C:\iperf>iperf3 -R -b 300M -p 17001 -c queen.cisp.co.za -u -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 62074 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 30.7 MBytes 258 Mbits/sec 0.025 ms 3613/25697 (14%) (omitted)
[ 5] 1.00-2.00 sec 35.8 MBytes 300 Mbits/sec 0.032 ms 0/25693 (0%) (omitted)
[ 5] 0.00-1.00 sec 35.8 MBytes 300 Mbits/sec 0.010 ms 0/25698 (0%)
[ 5] 1.00-2.00 sec 35.8 MBytes 300 Mbits/sec 0.006 ms 0/25682 (0%)
[ 5] 2.00-3.00 sec 35.8 MBytes 300 Mbits/sec 0.024 ms 0/25678 (0%)
[ 5] 3.00-4.00 sec 35.8 MBytes 300 Mbits/sec 0.014 ms 0/25691 (0%)
[ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec 0.040 ms 0/25671 (0%)
[ 5] 5.00-6.00 sec 35.8 MBytes 300 Mbits/sec 0.009 ms 0/25695 (0%)
[ 5] 6.00-7.00 sec 35.7 MBytes 300 Mbits/sec 0.007 ms 34/25693 (0.13%)
[ 5] 7.00-8.00 sec 35.8 MBytes 300 Mbits/sec 0.008 ms 0/25682 (0%)
[ 5] 8.00-9.00 sec 35.7 MBytes 300 Mbits/sec 0.048 ms 0/25669 (0%)
[ 5] 9.00-10.00 sec 35.8 MBytes 300 Mbits/sec 0.037 ms 0/25686 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.15 sec 363 MBytes 300 Mbits/sec 0.000 ms 0/260563 (0%) sender
[SUM] 0.0-10.1 sec 238 datagrams received out-of-order
[ 5] 0.00-10.00 sec 358 MBytes 300 Mbits/sec 0.037 ms 34/256844 (0.013%) receiver

iperf Done.

TCP 300
Code:
C:\iperf>iperf3 -R -b 300M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 11362 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.77 MBytes 14.8 Mbits/sec (omitted)
[ 5] 1.00-2.00 sec 17.5 MBytes 147 Mbits/sec (omitted)
[ 5] 0.00-1.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 1.00-2.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 2.00-3.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 3.00-4.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 4.00-5.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 5.00-6.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 6.00-7.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 7.00-8.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 8.00-9.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 9.00-10.00 sec 18.4 MBytes 154 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.14 sec 186 MBytes 154 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 184 MBytes 154 Mbits/sec receiver

iperf Done.

TCP 100
Code:
C:\iperf>iperf3 -R -b 100M -p 17001 -c queen.cisp.co.za -O 2
warning: Ignoring nonsense TCP MSS -2146716928
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.88.246 port 11396 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.77 MBytes 14.8 Mbits/sec (omitted)
[ 5] 1.00-2.00 sec 17.5 MBytes 147 Mbits/sec (omitted)
[ 5] 0.00-1.00 sec 16.6 MBytes 139 Mbits/sec
[ 5] 1.00-2.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 2.00-3.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 3.00-4.00 sec 12.0 MBytes 101 Mbits/sec
[ 5] 4.00-5.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 5.00-6.00 sec 11.9 MBytes 99.8 Mbits/sec
[ 5] 6.00-7.00 sec 12.0 MBytes 100 Mbits/sec
[ 5] 7.00-8.00 sec 11.9 MBytes 99.7 Mbits/sec
[ 5] 8.00-9.00 sec 10.4 MBytes 87.0 Mbits/sec
[ 5] 9.00-10.00 sec 13.1 MBytes 110 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.14 sec 126 MBytes 104 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 123 MBytes 104 Mbits/sec receiver

iperf Done.

Coreix Single 7:55


Coreix Single 7:55 (1)


Coreix Single 13:42
Yeah not sure, have you tried with another device?
 
Status
Not open for further replies.
Top