F/W for the 7202G and 7202GR2

nGAGEd55

Expert Member
Joined
Sep 21, 2005
Messages
3,280
drowssap said:
maybe you should purchase a better aerial for the billion, correct me if i am wrong :confused: the billion has detacheable aerials ... the aerials are quite cheap +-R150
well unless there's a factory fault with his router, I doubt it's the router's fault. I've tested mine where I was about 50m away from the router and the signal had to go through 2 walls
 

drowssap

Well-Known Member
Joined
Jun 14, 2005
Messages
190
nGAGEd55 said:
well unless there's a factory fault with his router, I doubt it's the router's fault. I've tested mine where I was about 50m away from the router and the signal had to go through 2 walls
i must admit i purchased a 7202g awhile back for a client ... laptop in kitchen could not connect or signal was very week ... 2 walls and less than 10m

i still need to make an appointment with him to do the firmware update at his site.

drowssap said:
the sum of the whole is greater than the parts!

this forum is gr8
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
Windows shows the signal to be 5 bars when I'm this close (ie 1 meter away) but the speed still drops, and I get disconnected.

I should actually get ahold of another wireless device and test incase it is actually my laptop.

But this morning I wake up with the entire network offline, my laptop and wireless PCs had zero connectivity! Had to turn the router on and off before anything would work again.

I'm seriously thinking about throwing this router at Digital Planet, or Billion, and buying myself something cheaper, which will probably work better.
 

drowssap

Well-Known Member
Joined
Jun 14, 2005
Messages
190
Azgard said:
Windows shows the signal to be 5 bars when I'm this close (ie 1 meter away) but the speed still drops, and I get disconnected.

I should actually get ahold of another wireless device and test incase it is actually my laptop.

But this morning I wake up with the entire network offline, my laptop and wireless PCs had zero connectivity! Had to turn the router on and off before anything would work again.

I'm seriously thinking about throwing this router at Digital Planet, or Billion, and buying myself something cheaper, which will probably work better.
wh@ will you charge for it and is it under warrentee! :rolleyes:
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
Well I got it yesterday, but it didn't actually come with an invoice, althought it should have a 2-year warranty.

I must actually email Digital Planet about that.

I'll still keep it for a while.. Will see if it works better maybe when it has an ADSL account. Or when I have it setup in bridge mode like I'm planning to have it.
 

BILLION Tech

BillionSA Representative
Company Rep
Joined
Mar 8, 2005
Messages
268
Hi Azgard

Did you upgrade the router with the 1.09 F/W from the Billionsa website?

Can you please forward us your contact details to support@billionsa.com and we will get back to you ASAP about this problem.
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
Ya I did upgrade the router with that F/W.

Sure I'll forward my details there :) Nice to see some support.

It does seem to be working a little better today, but it still does continually get disconnected every few hours, haven't been able to find anything that might be causing interference either :(
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
Have forwarded my details BILLION_Tech.

Found another problem this morning when I got up. I was completely unable to connect wirelessly to the router without restarting the router from another PC :(
 

cjh

Well-Known Member
Joined
Aug 16, 2005
Messages
146
Yep. I have all the same problems as Azgard, even with 1.09
 

Snormossel

Expert Member
Joined
May 29, 2006
Messages
3,456
Wireless Drivers

Have you guys checked ur drivers of the wireless cards? Maybe thats the problem.....
 

Darth Garth

Executive Member
Joined
Oct 29, 2004
Messages
6,207
Some wireless cards are better than others depending on the chipset involved ... had hassles with a Broadcom AP at home and switched to an Atheros solution (router+card) and it worked like a charm.
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
Yep. I have all the same problems as Azgard, even with 1.09

Nice to know I'm not alone.. now I'm more sure that it's the router causing the problem.

I have built-in Intel wireless, it is the latest version I checked today.

Someone from Billion Tech Support did contact me this morning, but didn't have any solution yet except for me to update the wireless card drivers.

cjh what wireless card are you using? Not an Intel is it?
 

cjh

Well-Known Member
Joined
Aug 16, 2005
Messages
146
Azgard said:
cjh what wireless card are you using? Not an Intel is it?

My laptop has an Intel PRO/Wireless 2200BG adapter, but it's the Netgear PCI card in my wife's PC that gives the most hassles, although I'm running latest drivers on both.
 

gee7022

Active Member
Joined
May 29, 2006
Messages
66
Spoke to the guys from Billion this morning and they said they are working on the problem.
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
That's the same wireless adapter that's in my laptop. Seems really strange.

I got an email this morning as well saying they are working on the problem.
 

GU7

Active Member
Joined
Jan 6, 2005
Messages
51
I have in the past experienced similar problems with 1 or 2 other brands. Try to change the wifi channel. I changed mine from 1 to 7 and the wifi speed and quality improved immensely.
 

Azgard

Well-Known Member
Joined
Feb 16, 2004
Messages
323
I've been going through the channels from 1, whenever I notice a lot of disconnects then I change the channel, so far it seems to be getting better. But I do still get a few disconnections. Using wired LAN for the moment though, much more stable.
 

BILLION Tech

BillionSA Representative
Company Rep
Joined
Mar 8, 2005
Messages
268
Drivers

Hi Guys

Have you all gone and downloaded the newest Centrino's driver and if so is it over 9.01X?

If Azgard & cjh will comment on this.

Thanks
 

cjh

Well-Known Member
Joined
Aug 16, 2005
Messages
146
I'm using 9.0.1.9

I can't comment too much on recent usage with my router though, because since I still don't have ADSL, I'm not on the home network much.

However, my wife's Netgear card is giving endless grief (latest drivers)

Touch wood, I should have DSL by next week (ha ha) at which point I'll be able to give more informed info
 
Top