I have a few 2 ways which I'm trying to wore with a shelly. At the moment not going to well but I just need to figure out which of the 2 wires is common and which is output to the light. Then it should work.
Yeah I did this on shelly2.5s no issue. I think the dimmer is more interesting if you want dimming from the button. But technically should work.
With the 2.5 did you use both SW outputs or just one?
Just one for the 2way switch. The other for another light circuit.
Exactly what I intent on doing.
Another option on Unifi instead of binding is enabling minimum rsi setting. This prevent any device with a too bad connection, connecting to a specific AP. You will very quickly learn where you have spots with bad connections that possibly need another AP in that location.
www.robofactory.co.za
No offence but if you can live with the looks and aesthetic it's a good option. But I personally find them really uglyHas anybody used these dimmers from Robofactory:
Black Wifi Dimmer Light Switch - eWelink
This WiFi Dimmer Switch can work with Incandescent lamp, halogen lamp, Iodine tungsten lamp, Resistive buck LED lamp, stepless dimming LED lamp. Not all LED bulbs are suitable for our WiFi dimmer switch, so we have a dimmable LED bulb that can be dimmed with the WiFi switch. Intelligent dimming...
Looks like a generic make that also works with the Ewelink app. How do you get this into HA? This will work easier in my case than the Shelly dimmer since there is already 2-way switches installed. So 1 will be replaced with this dimmer switch and the other 1 with a Sonoff T3 that will just turn on the lights to max when pressed.
Similar to this:
Not sure how else to do it. There are a few downlights in the passage with a switch either end. Could just wire up the shelly dimmer to them but if someone switches off one of the switches the lights are off and cannot be controlled. And having a button that can be pressed to turn the lights on full could also be useful.
I was thinking of removing the 1 switch entirely, but there is another light at that end as well so installing a 1 gang or 2 gang doesn't really make a difference. The one I want to remove is only a 1 gang so I will have to close up the hole there then.
Getting this into HA isn't an issue - it will either use the standard Sonoff or Tuya integrationsHas anybody used these dimmers from Robofactory:
Black Wifi Dimmer Light Switch - eWelink
This WiFi Dimmer Switch can work with Incandescent lamp, halogen lamp, Iodine tungsten lamp, Resistive buck LED lamp, stepless dimming LED lamp. Not all LED bulbs are suitable for our WiFi dimmer switch, so we have a dimmable LED bulb that can be dimmed with the WiFi switch. Intelligent dimming...
Looks like a generic make that also works with the Ewelink app. How do you get this into HA? This will work easier in my case than the Shelly dimmer since there is already 2-way switches installed. So 1 will be replaced with this dimmer switch and the other 1 with a Sonoff T3 that will just turn on the lights to max when pressed.
Similar to this:
I have the same setup (using VirtualBox) and have no issues starting up after loadshedding. Are you running of an SSD as well?
I'm running HA on a hyper-v setup. It's never had any issues, even with (many) random power trips.
I moved it to a HD is the OS ssd is too small. Maybe that's the issue.
My HA instance is running in VirtualBox on Windows 10, using a HDD. No problems with unscheduled restarts, but I do use an app to stagger startup of apps/services on boot.
Me too. I have a setup that starts the VM about 8 minutes after the power has returned. The reason being by then my UniFi network, ISP connection and APs, Unifi controller and other iOT hubs are all up and then HASS doesn't complain about not finding things.
Sign up with Google