Prepaid Electricity - Where to find the Meter Number

jhart

Well-Known Member
Joined
Dec 4, 2005
Messages
307
Hi all

Me moved into a new house.

We have a Landis+Gyr PLC CIU Mk3 interface unit.

I have entered "i0000" and then it shows me a number. This number seems to be incorrect/incomplete since online banking won't accept it.

I phoned City Power and they tell me that I need a card or an old slip.

The previous tenant didn't leave this card behind.

Any advice on how I need to proceed to get the meter number?

Thanks. 20200216_155809.jpeg
 

WAslayer

Executive Member
Joined
May 13, 2011
Messages
8,938
Hi all

Me moved into a new house.

We have a Landis+Gyr PLC CIU Mk3 interface unit.

I have entered "i0000" and then it shows me a number. This number seems to be incorrect/incomplete since online banking won't accept it.

I phoned City Power and they tell me that I need a card or an old slip.

The previous tenant didn't leave this card behind.

Any advice on how I need to proceed to get the meter number?

Thanks. View attachment 785180
Try code "000"..
 

Pineapple Smurf

Pineapple Beer Connoisseur
Joined
Aug 2, 2016
Messages
43,435
extract from manual:

6.2 Meter Number (Register 000) The meter displays the unique identity number personalised at the time of manufacture. It must match the number printed on the meter’s front panel label. NB: This number excludes the manufacturer code (“07” in the case of Cashpower meters manufactured in South Africa), check-digit (last digit of the serial number label) and leading zeros of the meter number. For example, meter number 07 0286 6860 1 will be displayed as 286 6860.
 

isie

Honorary Master
Joined
Jan 16, 2010
Messages
12,604
Go look on the meter itself (not the the ciu)
this ^ you need to go out side and get the number from the actual meter , it might not have any unit readings on it , just the meter number
 

craigcul

Well-Known Member
Joined
Dec 17, 2012
Messages
281
Hi jhart first you need to type i024 this will give you the first two digits of your meter number and the last digit of your meter number then you can type in i000 this will give you the digits in between Normally in South Africa the first two digits will be 07 but rather use i024 to make sure.

Exert from the manual
The extended meter number displays the missing three digits of an (Sts only) meter numbering the format ,07——n where 07 is the manufacturer code (07 for South African manufactured meter)
n represents the check digit.
 
Last edited:

jhart

Well-Known Member
Joined
Dec 4, 2005
Messages
307
Thank you! All of your suggestions worked. I'm sorted. Just wish that City Power had the same knowledge. Such a simple process if you know...

Thanks again.
 

Lupus

Honorary Master
Joined
Apr 25, 2006
Messages
50,982
Thank you! All of your suggestions worked. I'm sorted. Just wish that City Power had the same knowledge. Such a simple process if you know...

Thanks again.
Now the next step is getting it into your name, apparently I've got to go to Booysens to do so, yet I live in Roodepoort. So for the last two years it's been in someone elses name, even though I've gone to City power to change it.
 

Geoff.D

Honorary Master
Joined
Aug 4, 2005
Messages
26,878
RTFM is becoming a lost competency.
But at the same time, the stupidity of the system and how it is run and supported by municipalities is disgusting.
As to getting access to the actual meters? That is also not guaranteed. In CT for example, it is impossible because the meters are all inside locked cabinets not accessible by anyone except the Council.
 
Last edited:

Siminyabafana

New Member
Joined
Jul 24, 2022
Messages
2
How did u solve it.i got all the digits but Its still saying meter number invalid or not registered.when I try to buy through bank
 

Siminyabafana

New Member
Joined
Jul 24, 2022
Messages
2
Yes I have no contact but I finally used some advice from the comments.
My Meter is blocked by the municipality
 

Mrdhe

New Member
Joined
Dec 24, 2022
Messages
1
extract from manual:

6.2 Meter Number (Register 000) The meter displays the unique identity number personalised at the time of manufacture. It must match the number printed on the meter’s front panel label. NB: This number excludes the manufacturer code (“07” in the case of Cashpower meters manufactured in South Africa), check-digit (last digit of the serial number label) and leading zeros of the meter number. For example, meter number 07 0286 6860 1 will be displayed as 286 6860.
Thanks for saving the day
 
Top