Totolink with vumatel CPE help

A

araujo3rd

Well-Known Member
Joined
Jul 6, 2008
Messages
169
I currently have a tp link connected to the CPE unit and it gets ip from DHCP and nothing needs to be configured. I would like to connect my totolink nd300 ADSL router which has an ADSL and a wan port to be used as the new wireless router. However when I connect it to the wan it does not get internet access and I am sure it has something to do with the config.

I changed ADSL wan to ethernet wan. And I tried it on bridged mode and DHCP. The bottom of the page shows the link status is up but there is no IP they both show 0.0.0.0. Please can someone help me set this up or is it not possible to do it on this router
 
RocketNet-Rep

RocketNet-Rep

Well-Known Member
Company Rep
Joined
Aug 12, 2017
Messages
439
araujo3rd said:
I currently have a tp link connected to the CPE unit and it gets ip from DHCP and nothing needs to be configured. I would like to connect my totolink nd300 ADSL router which has an ADSL and a wan port to be used as the new wireless router. However when I connect it to the wan it does not get internet access and I am sure it has something to do with the config.

I changed ADSL wan to ethernet wan. And I tried it on bridged mode and DHCP. The bottom of the page shows the link status is up but there is no IP they both show 0.0.0.0. Please can someone help me set this up or is it not possible to do it on this router
Click to expand...

Hey there do you have a Raycore Router / CPE
 
E

Evonet Management

Evonet Management
Company Rep
Joined
Nov 4, 2016
Messages
25
Very simple to solve. Call your ISP's helpdesk and ask them to reset your IP/Mac bind.

araujo3rd said:
I currently have a tp link connected to the CPE unit and it gets ip from DHCP and nothing needs to be configured. I would like to connect my totolink nd300 ADSL router which has an ADSL and a wan port to be used as the new wireless router. However when I connect it to the wan it does not get internet access and I am sure it has something to do with the config.

I changed ADSL wan to ethernet wan. And I tried it on bridged mode and DHCP. The bottom of the page shows the link status is up but there is no IP they both show 0.0.0.0. Please can someone help me set this up or is it not possible to do it on this router
Click to expand...
 
Last edited:
RocketNet-Rep

RocketNet-Rep

Well-Known Member
Company Rep
Joined
Aug 12, 2017
Messages
439
araujo3rd said:
Hi there yes it is a raycore
Click to expand...

Turn off your CPE for about 5mins this normally releases the MAC address from your other router, alternatively call your ISP and ask them to please refresh the MAC your totolink needs to be setup in DHCP on the WAN port for everything to work.

BTW, who is the ISP?
 
A

araujo3rd

Well-Known Member
Joined
Jul 6, 2008
Messages
169
Ronald-RocketNet said:
Turn off your CPE for about 5mins this normally releases the MAC address from your other router, alternatively call your ISP and ask them to please refresh the MAC your totolink needs to be setup in DHCP on the WAN port for everything to work.

BTW, who is the ISP?
Click to expand...
Ok thank you I will give it a shot and if it does not work I'll call them tomorrow. The ISP is crystalweb
 
Sinbad

Sinbad

Honorary Master
Joined
Jun 5, 2006
Messages
81,152
Ronald-RocketNet said:
Turn off your CPE for about 5mins this normally releases the MAC address from your other router, alternatively call your ISP and ask them to please refresh the MAC your totolink needs to be setup in DHCP on the WAN port for everything to work.

BTW, who is the ISP?
Click to expand...

This does not work on vumatel. It needs to be manually released by the isp.
 
You must log in or register to reply here.
Top