Unicable output on smart lnb no signal

[Pangsbg]

Good day, I have two HD decoders(4U models) connected to an smart lnb in a tragiese setup...the primary connected to the universal output and the secondary on unicable A output on the lnb for some reason the one connected to the unicable A output doesn't receive any signal whatsoever. Do you perhaps have a solution for meh please and thank you.

 

[Nick333]

Do you have the decoder set to use unicable?

 

[Pangsbg]

Yes the lnb type is set to unicable/satcr but stil no signal

 

[Nick333]

Yes the lnb type is set to unicable/satcr but stil no signal

Have you tried one of the other unicable outputs?

 

[Pangsbg]

Yes i have and only the universal output sends signal to the one decoder

 

[Pangsbg]

Will it make any change if i connect both decoders on unicable outputs.

 

[Nick333]

Yes i have and only the universal output sends signal to the one decoder

Try swapping decoders and see if the other decoder gets a signal. At this point it's either a cable fault or a faulty decoder.

 

[Nick333]

Will it make any change if i connect both decoders on unicable outputs.

It shouldn't make a difference. Plus then you'll have to change the index for one of them.

 

[Pangsbg]

Try swapping decoders and see if the other decoder gets a signal. At this point it's either a cable fault or a faulty decoder.

Yes i took the secondary and connected it to the universal cable and it got signal but when I put it back on the unicable cable it again had no signal, so that tells me the decoders are not faulty, I even swoped the cables at the lab's side, so which ever decoder that's is connected to the universal output gets a signal and either decoder on the unicable output has no signal

 

[Nick333]

Yes i took the secondary and connected it to the universal cable and it got signal but when I put it back on the unicable cable it again had no signal, so that tells me the decoders are not faulty, I even swoped the cables at the lab's side, so which ever decoder that's is connected to the universal output gets a signal and either decoder on the unicable output has no signal

OK. Then it's a faulty lnb, or you're doing something wrong that I'm not seeing.

Maybe post a pic of your home network screen.

 

[Pangsbg]

It shouldn't make a difference. Plus then you'll have to change the index for one of them.

Tell meh if i connect both decoders on lets say unicable A and B on the lnb side and change the frequency and index on the one decoder should it work?

 

[Nick333]

Tell meh if i connect both decoders on lets say unicable A and B on the lnb side and change the frequency and index on the one decoder should it work?

It should, but it should also work the way you're doing it now.

 

[Pangsbg]

This is the home network of the decoder with no signal

 

[Nick333]

Well, if the cable works on the universal output, you've tried both decoders on the unicable outputs, and you've tried all three unicable outputs, what you're left with is a faulty lnb.

 

[Pangsbg]

Well, if the cable works on the universal output, you've tried both decoders on the unicable outputs, and you've tried all three unicable outputs, what you're left with is a faulty lnb.

Yes im starting to think that might be the problem because I've done the necessary troubleshooting. Thank you for your help.

 

[xodosman123]

is the decoder setup correctly?