Unifi solution for home with concrete roof and no ceiling void

Azimuth

Expert Member
Joined
Sep 25, 2013
Messages
2,308
One last item. Do not under any circumstances drill through the slab and compromise the waterproofing! That will be a real disaster.
Look for a neat way to disguise surface mounted cables that looks like a decorative feature and not just trunking.

Is there tolerance/budget for suspended ceilings below the concrete? At least there will be power and the lighting can just be redone. Might be a solid long-term option.
 

Muttley

Expert Member
Joined
Jan 6, 2016
Messages
1,595
My suggestion as well for the exact same problem a while ago.

Plus you get wifi coverage outside as well.

NanoStation Loco M2 mounted outside, pointing at the house. Weird solution, but works well. The M5 will probably also work well.

Per a recent Miro mailshot on the Amplifi, well, system really - that wired backhaul between the routers solves one of the biggest shortcomings they had.

Moar on official channel.

Thanks for this.

I think these are quite pricey (from scoop.co.za - R7120 incl) - IMO it would make more sense to put an AP AC Lite/LR in a few rooms
 

bdt

Executive Member
Joined
Jun 7, 2004
Messages
7,001
Oh they're pricey all right, but then they do (purport to) offer other advantages to compel you to buy in. Thing with discrete APs is feeding back to a (preferably!) PoE switch, which itself can get entertainingly expensive. Which raises questions of how distributed is your area to be catered for, and what routing can you get away with, budget - the usual fun things. Also, per that mailshot why not avail yourself of the coverage simulator?
 

bdt

Executive Member
Joined
Jun 7, 2004
Messages
7,001
Unless I'm badly mistaken, it looks like you can buy only the actual routers, and then give them wireless backhaul between them; yes it's on the expensive side but (maybe) better than also getting those fugly mesh points that you may not want?
 

bdt

Executive Member
Joined
Jun 7, 2004
Messages
7,001
(multi) hop throughput cost, lack of speed (further) down the line because of not getting good enough signal between nodes?
 

Muttley

Expert Member
Joined
Jan 6, 2016
Messages
1,595
Oh they're pricey all right, but then they do (purport to) offer other advantages to compel you to buy in. Thing with discrete APs is feeding back to a (preferably!) PoE switch, which itself can get entertainingly expensive. Which raises questions of how distributed is your area to be catered for, and what routing can you get away with, budget - the usual fun things. Also, per that mailshot why not avail yourself of the coverage simulator?

Thanks - will have a look at the simulator.

I'll apply this when I do a proper site visit in 2 weeks time.
 

bdt

Executive Member
Joined
Jun 7, 2004
Messages
7,001
Never configured one of these so not sure what the penetration/setup will be like.
NanoStation locoM datasheet (pdf link); Smith chart coverage on page 5. Takeaway - 3dB rolloff at 30deg either side of where you aim them; they're ...kind of directional.
 

Slootvreter

Honorary Master
Joined
Aug 7, 2008
Messages
30,273
NanoStation locoM datasheet (pdf link); Smith chart coverage on page 5. Takeaway - 3dB rolloff at 30deg either side of where you aim them; they're ...kind of directional.

Ja, they're multipoint base stations. Pretty powerful little things. Mounted one on the outside of my friend's house facing the house so he could have coverage on both floors.
 

bdt

Executive Member
Joined
Jun 7, 2004
Messages
7,001
Ja, they're multipoint base stations. Pretty powerful little things. Mounted one on the outside of my friend's house facing the house so he could have coverage on both floors.
I know them well, and for their intended use-case they rock (the whole !@#^%$! Ubiquiti 24V "PoE" kark aside at any rate); not convinced that this would be within that use-case though.
 
Top