What would these instructions mean

[kronoSX]

These settings are preconfigured for you all you need to do now is click start.
Once the format is complete DO NOT close the window just leave everything as it is and open a command prompt from your start menu (type cmd in the search bar or run box depending on your version of windows.).

Inside of the command windows go to the directory you have bootsect.exe saved.
(use the cd directoryname command to switch folders)

Now type "bootsect.exe /nt52 R:" NOTE R: is the drive letter for my USB stick if yours is different you need to change it accordingly.



Can anyone explain this in laymans terms for me please.
The files i extracted is in c:/xxxxxxxxxx
I typed cmd and then typed c:\bootsect.exe /nt52 e:nothing happened

 

[LandyMan]

What are you trying to do? I am guessing booting from a Memory stick?

 

[kronoSX]

Setting up to install xp from usb stick

 

[milomak]

I will assume you have finished the format (and running XP). I will also assume that the drive letter for your USB stick is R:

Start --> Run
type cmd
A dos command shell should open up.
type cd \xxxxxxx
type bootsect.exe /nt52 R:

 

[BiteMe]

Now type "bootsect.exe /nt52 R:" NOTE R: is the drive letter for my USB stick if yours is different you need to change it accordingly.



Can anyone explain this in laymans terms for me please.
The files i extracted is in c:/xxxxxxxxxx
I typed cmd and then typed c:\bootsect.exe /nt52 e:nothing happened

"nothing happened" is probably exactly what was meant to happen.
all that command does it write a standard bootsector to the drive you specified(in your case, e : )
it should just go back to the prompt after that...nothing interactive or anything.
if it did, without giving any error messages, then it worked.

 

[kronoSX]

Sorry for being so unclear. Its tutorial on how to install xp from a usb stick. This is only part of the tutorial. I will post the link to the whole thing but the power is off and i an using opera mini

 

[kronoSX]

i am still having a problem.

 

[kronoSX]

this is the whole tutorial


Asus EEE PC.
To complete this tutorial you need a 32bit version of Windows XP or Windows Vista installed on your home PC.

What you'll need:
USB_PREP8 (alternative download)
PeToUSB (alternative download)
Bootsect.exe (alternative download)
Special Note: If you use the program Nlite be sure to keep the manual installation files as the USB_prep8 script relies on these files.

Extract the files in Bootsect.zip
The next step is to extract USB_prep8 and PeToUSB.
Next copy the PeToUSB executable into the USB_prep8 folder.
Inside of the USB_prep8 folder double click the executable named usb_prep8.cmd.

The window that opens will look like this:



Press any key to continue

You next window will look like this:

These settings are preconfigured for you all you need to do now is click start.
Once the format is complete DO NOT close the window just leave everything as it is and open a command prompt from your start menu (type cmd in the search bar or run box depending on your version of windows.).

Inside of the command windows go to the directory you have bootsect.exe saved.
(use the cd directoryname command to switch folders)

Now type "bootsect.exe /nt52 R:" NOTE R: is the drive letter for my USB stick if yours is different you need to change it accordingly. What this part does is write the correct boot sector to your USB stick, this allows your PC to boot from the USB stick without it nothing works.
Please note: When running the bootsect.exe command you cannot have any windows open displaying the content of your USB stick, if you have a window open bootsect.exe will be unable to lock the drive and write the bootsector correctly.

If all went well you should see "Bootcode was successfully updated on all targeted volumes."

Now you can close this command prompt (don't close the usbprep8 one by mistake) and the petousb window.

You window you see now should look like this:

If it doesn't try pressing enter.

Now you need to enter the correct information for numbers 1-3.
Press 1 and then enter. A folder browse window will open for you to browse to the location of you XP setup files (aka your cdrom drive with xp cd in)
Press 2 and enter a letter not currently assigned to a drive on your PC
Press 3 and enter the drive letter of your USB stick
Press 4 to start the process.

The script will ask you if its ok to format drive T:. This is just a temp drive the program creates to cache the windows installation files. Press Y then enter.

Once it's done formating press enter to continue again, you can now see the program copying files to the temp drive it created. Once this is done press enter to continue again.

Next you will see a box pop up asking you to copy the files to USB drive yes/no you want to click yes.

Once the script has completed copy files a popup window asking if you would like to USB drive to be preferred boot drive U: select YES on this window.

Now select yes to unmount the virtual drive.

Ok we are done the hard part, close the usbprep8 window.

Now make sure your EEE pc is configured with USB as the primary boot device.
Insert your USB drive and boot up the EEE.

On the startup menu you have two options, select option number 2 for text mode setup.

From this point on it is just like any other windows XP installation delete/recreate the primary partition on your EEE pc and format it using NTFS. Make sure you delete ALL partitions and recreate a single partition or you will get the hal.dll error message.

Once the text mode portion of setup is complete it will boot into the GUI mode (you can press enter after the reboot if your too excited to wait the 30 seconds)

Once the GUI portion of setup is complete you will again have to boot into GUI mode this will complete the XP installation and you will end up at you XP desktop. It is very important that you DO NOT REMOVE THE USB STICK before this point. Once you can see your start menu it is safe to remove the usb stick and reboot your pc to make sure everything worked.

This method has advantages over all current no cdrom methods of installing XP to the EEE. You do not have to copy setup files in DOS to the SSD and install from there. It gives you access to the recovery console by booting into text mode setup, and it gives you the ability to run repair installations of XP if you have problems later on.

I hope this worked out for you and please post feedback to the comments section.
Please note due to the amount of comments this article has received you must now click on "Post a Comment" below the existing comments to view the most recent feedback in a popup window.

Posted by Nick at 3:21 PM

 

[kronoSX]

anyone done this already

 

[kronoSX]

here is the link i promised
http://www.eeeguides.com/2007/11/installing-windows-xp-from-usb-thumb.html

 

[xrapidx]

Slightly offtopic, anyone know if the same can be done for Vista?

 

[.Froot.]

I wouldn't like to run Vista on a flash drive.... I burnt my Vista a while ago, but isn't it something like 10GB? You're better off using an external hdd...

 

[kronoSX]

Anyone do this before

 

[HavocXphere]

dablakmark8: I see little benefit in this. usb sticks are just plain slow. Good for small bursts of data quick, but the sustained data transfer sucks. Windows will load very slowly.

Vista on a hdd is fairly slow, on a usb it will crawl.

 

[The Axe Dude]

I have used this exact script for loading XP onto my EEEPC...If you look into the comments section, near the bottom, you will see that some revisions need to be made to the script... (Although this has nothing to do with your error )

But back to your problem, you extracted the files to the root of C:/ right? So, in CMD you would go:

cd C:\
bootsect.exe /nt52 E:

It SHOULD then print out a message that it worked, if it does not, then I'm afraid I can't really help

It did work for me though, so there is still help

 

[kronoSX]

I have used this exact script for loading XP onto my EEEPC...If you look into the comments section, near the bottom, you will see that some revisions need to be made to the script... (Although this has nothing to do with your error )

But back to your problem, you extracted the files to the root of C:/ right? So, in CMD you would go:

cd C:\
bootsect.exe /nt52 E:

It SHOULD then print out a message that it worked, if it does not, then I'm afraid I can't really help

It did work for me though, so there is still help

I tried it many times and it seems not to work for me.
I see in the other cmd window it says press any key to continue,I am pressing fkin hard that the keyboard cries of painbut nothing happens.The message in the cmd window does not change to the list thats in the online tutorial.
this is where i am stuck,but i noticed you switch from backward to forward slash in your command line
I will check tonight if i did this

 

[The Axe Dude]

I presume that you got it to work from a post you made in another thread, suggesting this method.

With regard to changing between forward and backslash, when you do a "cd" in cmd, it uses backslashes after the drive letter

 

[kronoSX]

gave up on it but others might well,get it right...lol

 

[The Axe Dude]

Ah, ok...I'm trying to think if there is anything I did differently...Not sure...If I come up with anything, I'll let you know

 

[kronoSX]

Will let you know he i come right tonight.