Hi there guys, I am trying to configure both of these routers having a WIC-1ADSL installed in both. I cannot seem to get either of them connecting. I have tried everything and just end up landing right where I began. I have looked at previous posts put up and non of them help.

The 2610XM has ios: c2600-adventerprisek9-mz.124-7
The 1841 has: c1841-advipservicesk9-mz.124-12

I know my line is fine since I can browse the net via my standard Telkom router.

My config looks like this:

interface FastEthernet0/0
ip address 192.168.x.x
ip nat inside

!--- DSL interface.

interface ATM0/1
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
hold-queue 224 in

interface ATM0/1.1 point-to-point
pvc 8/35
pppoe-client dial-pool-number 1

interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username [email protected] password xxxxxxxxx

ip nat inside source list 1 interface Dialer1 overload
ip classless
ip route dialer1
no ip http server
access-list 1 permit
dialer-list 1 protocol ip permit

I am not quite sure which debugs to run, ppp negotiation and authentication does not give me anything useful to work with. Am I doing something wrong?

Thanks a million in advance
Special Boy!