Recent content by Greglsh

  1. Greglsh

    Concern around SABC's lack of finalised funding

    Put it all behind a pay system, if you want it pay for it, they will soon see that the people who want it "can't" or wont pay for it and the rest just don't want it. It was always going to fail to make people pay for something they don't use. Decades ago people had no choice on what to watch...
  2. Greglsh

    LIFEPO4 Battery discussion thread

    I am not to sure about the iBMS, I think with iBMS you buy the hardware and software from the same guy, I did see it on Andy's YouTube, but if I remember correctly it was expensive as I think you need 1 per battery or something like that. This is open source, you basically just have to get the...
  3. Greglsh

    LIFEPO4 Battery discussion thread

    If you guys like to tinker with some YAML or you good at copy and paste and a bit of AI, take a look at this project. I have been running this for about a year and it works well for me. You can mix and match different BMS's and it controls charging etc. I bought an M5stack ESP32-S3, a M5stack...
  4. Greglsh

    Eskom walks back threats against unregistered solar panel users in South Africa

    Wanted to ask has anybody been through this process with eThekwini Municipality, how was the process and what changes did they make (replace meters etc), any costs involved. I am still not wanting to register my system as I feel it is a money making action far before it is a safety concerning...
  5. Greglsh

    What's your base load?

    I also used to do this with 2 different routers in the house and the phone would cling on (Star Trek) to the one unit even with 1 bar, so would have to force it to move to the other. it works okay if it drops the signal but not if it still can contact the router.
  6. Greglsh

    What's your base load?

    I have currently a 14.3Kwh DIY battery, and have almost completed another 14.3Kwh battery so will have almost 23kwh of battery backup so even if I use 1 kwh I will last almost a day and could use more if desperate as this is down to 20% left.
  7. Greglsh

    What's your base load?

    I run the Ubiquiti Cloud Gateway Ultra, with 2 x Unifi 6 lite and 1 Unifi LR.
  8. Greglsh

    What's your base load?

    So it's 3 units to cover the property 2 in the house and 1 in the granny flat :oops:. All media players or TV's are cabled into the network, Xbox is cabled, as well. Also have a Mikrotik in the garage and a Google smart speaker in the garage to play music so need Wi-Fi in there as well.
  9. Greglsh

    What's your base load?

    Wife and I, work for same IT company. Every room has a network point or 2, 3 Unifi ceiling access points, Unifi router, fans controlled by a temperature monitor so fans do not run all the time, plus a Hikvision NVR with POE ports.
  10. Greglsh

    What's your base load?

    Base load during the day is +-850w to 950w, work from home so we have a network cabinet (+-300w), with 24 port switch, router, ad blocking Raspberry pi, Synology NAS and cooling fan, then 2 computers a CCTV system, 1 double door fridge, 1 single door fridge and a chest freezer, then a 46 inch TV...
  11. Greglsh

    Eskom scraps solar registration requirements

    Okay, this is still as clear as mud. If you are an Ethekwini electricity customer do I still need to register my system? If so with whom and what do I need. Maybe MyBroadband can do a full article saying who needs to register with whom. When I first read these stories, it seemed like it was only...
  12. Greglsh

    Sunsynk + Home Assistant

    I have the MQTT explorer, but it looks like it is only the DC temp that is being reported on.
  13. Greglsh

    Sunsynk + Home Assistant

    I am using Solar Assistant, I have the DC temp , but no AC.
  14. Greglsh

    Sunsynk + Home Assistant

    Hi, I am trying to get the AC temperature of the inverter and can't seem to get this info, what entity is this? Is it coming from Solar Assistant? Any help will be great.
Top
Sign up to the MyBroadband newsletter
X