Recent content by JeandreCoetzer

  1. J

    Hass and IDS alarm integration

    So yesterday i finally made it to work. Not really what i was hoping to get. You will probably be able to bypass the zones or arm/dismarm the alarm from home assistant. I wanted to get the status of each of the zones. but it looks like the HYYP app only post those when the zone is triggered...
  2. J

    Hass and IDS alarm integration

    Where can i find the rest api for the hyyp server? or how do i go about doing this? I am mostly interested in the zone statusses, not so mush worried about the control
  3. J

    SA smart plugs that can be flashed with Tasmota

    You just have to shirt IO0 to ground when powering up to put into flash mode
  4. J

    SA smart plugs that can be flashed with Tasmota

    No you have to open and solder directly to the chip or to the pads on the back to flash using a usb to serial converter
  5. J

    SA smart plugs that can be flashed with Tasmota

    I do not have a plug to open at the moment. The pads on the back of the chip is labeled for soldering. I also saw that if you use tazmotizer you should download the tazmota.bin file and load it seperately from the app. Mine did not want to flash when i select the download and flash option.
  6. J

    Hass and IDS alarm integration

    I know this is a very long time ago. How did you connect to the IDS alarm system or HYYP to get the info?
  7. J

    SA smart plugs that can be flashed with Tasmota

    Does anyone know to which pin the Wifi LED is connected to?
  8. J

    SA smart plugs that can be flashed with Tasmota

    I am using home assistant. But the enity resets. What is the setup to store the total energy usage and have it continue where it left off before the power outage?
  9. J

    SA smart plugs that can be flashed with Tasmota

    Does anyone know how to save the energy consumtion and keep on counting when the power goes out? Like during loadshedding my plug resets and the total energy consumption resets
  10. J

    SA smart plugs that can be flashed with Tasmota

    I recently bought the BNETA smart plugs from Takealot. I tried to flash with Tuya convert but had no luck as it seems to have the lastest firmware from Tuya. I opened the plugs up and could then flash the plugs by soldering to the serial pins and using tasmotizer to flash. Worked perfectly if...
Top