Roughly calculated, but will decrease to stick within that load:
4 LED outside perimeter lights 10w each.
LED lights for 3 rooms
Burglar alarm
Server
Modem/router
24 port POE switch with couple IP cams
CCTV DVR
TV with PC
Thank you kindly for your time Geoff :notworthy: I'm giving up on this and tossing the idea, will explore the inverter route as with @Dairyfarmer's project.
Thanks :thumbsup:
That explains @Chuckmyster removing his batteries too and replacing with new larger ones.
Cost of replacing all batteries with new big ones on the UPS vs inverter setup with batteries.
I need a min of 2 hours with a 1500w load.
Thanks guys.
Thanks :D
Would the 8 big batteries then make it go "KABOOOOM!" as discussed in the previous thread, or can I get away with it by closely monitoring the temperature?
Thank you all for your valuable expertise and contribution - I have started a new thread on the UPS topic to avoid further derailing the OP thread on inverters here:
https://mybroadband.co.za/forum/threads/ups-extending-the-backup-run-time-of-a-ups-with-an-external-deep-cycle-battery.1007092/
That's exactly what I am looking for - I am thinking along the lines of only connecting the charged up external bank once Eskom is off and UPS running. When Eskom is restored, I will disconnect the bank and charge it myself with a standalone charger so that the UPS does not have to charge it...
Hi Forumites
Decided to start a new thread instead of derailing a recent thread started on inverters - Apologies @Dairyfarmer. https://mybroadband.co.za/forum/threads/inverter-and-batteries.997062/
I will ask the mods to move my posts here and continue the discussion.
Thank you everyone for...
Thanks Chuckmyster - I think I will take some internal pics of the wiring etc. and revert to you experts before I blow up my UPS :eek:
Thanks for your time.
Thank you kindly for your expertise Geoff. I guess it now comes down to getting a bunch of 7ah batteries or going the inverter way as with @Dairyfarmer solution.
Thanks Geoff.
So if I had to build a battery bank on the side, charge it separately (standalone charger) and "flip a switch" to connect the bank to the UPS once UPS is running with the load, it should be ok? Once Eskom is back on, I disconnect the bank and charge again?
@Dairyfarmer - Apologies for hijacking/derailing this thread, but all you experts are right here..
I am also exploring the same solution, however, I am contemplating possibly using my UPS so that it is "clean" power. I have a 3kva UPS (pure sine wave) - Would it be "ok" to add additional...