Digichilli Experiment

W

WorldHosting

Active Member
Joined
Nov 30, 2009
Messages
51
Reaction score
0
Location
Pretoria
I have setup a DC++ hub for Digichilli users.

Address: 83.133.119.246



[17:32] <BodyGaurd> Your reported IP: 192.x.x.x does not match your real IP: 196.x.x.x
[17:32] *** Redirect request received to a hub that's already connected
[17:32] *** Disconnected
Click to expand...
Solution by Basjohn:
Basjohn said:
Click the "GET IP" button in your settings. Disable passive mode and also make sure your correct ip is set under BIND IP address in the top right.

DC is weird like this but I set people up every year at rage (and co-managed the ibust hub for most of its life) so I'm quite used to its retardation.

Also for socket errors check the Advanced-> Security section and click generate certificates and check all three tick boxes AS WELL AS the above steps I just mentioned.

Lastly make sure you've forwarded ports on your router as portforward.com instructs.
Click to expand...
 
Last edited:
[09:18] *** Connecting to digichillie.no-ip.info...
[09:19] *** A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
 
kimbo said:
[09:18] *** Connecting to digichillie.no-ip.info...
[09:19] *** A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
Click to expand...

Try again, forgot to open the ports on my firewall.
 
still get the same .. :(

[09:25] *** Connecting to digichillie.no-ip.info...
[09:26] *** A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
 
absk300 said:
i have not used dc++ before. quick guide if you please.
Click to expand...

Download and install DC++ http://dcplusplus.sourceforge.net/
*Launch dc++
*Click Favourite hubs(yellow start)
*Right click anywhere and select "New"
*Add a name for the hub, the ip as in 1st post and your nickname select ok.
*Select the newly created favourite and click connect.

Will help you further after you have logged on
 
[14:35] *** Connecting to banarray.pointto.us:8002...
[14:36] *** A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. - The error i get... i connected but then it dieded on me :(
 
Stillie said:
[14:35] *** Connecting to banarray.pointto.us:8002...
[14:36] *** A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. - The error i get... i connected but then it dieded on me :(
Click to expand...


Restart dc++ and rather use the ip to connect.
 
WorldHosting said:
Download and install DC++ http://dcplusplus.sourceforge.net/
*Launch dc++
*Click Favourite hubs(yellow start)
*Right click anywhere and select "New"
*Add a name for the hub, the ip as in 1st post and your nickname select ok.
*Select the newly created favourite and click connect.

Will help you further after you have logged on
Click to expand...

thanks, will do it tonight. you able to assist after hours?
 
this Experiment is looking great! maxing out lines so far! need more members with lines like mine ;) 4meg
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X