Recent content by l3ok

  1. L

    My journey to renewable energy - Solar

    @Tander, wat does your savings look like now?
  2. L

    Hass and IDS alarm integration

    You do not need the IP150. The Pi can simulate the IP150 if I remember correctly.
  3. L

    Hass and IDS alarm integration

    Yes you will need a level shifter to go directly to the pi pins, this is my shopping list:
  4. L

    Hass and IDS alarm integration

    Did you have to get a USB OTG cable to convert the OTG micro usb to standard, and if so where?
  5. L

    Hass and IDS alarm integration

    Awesome found it. I guess the old ids 805 pannel is going to go. https://github.com/ParadoxAlarmInterface/pai
  6. L

    Hass and IDS alarm integration

    I'm more thinking of the interface option, so leave legacy as is, and add konnected as the "smart" interface. Does this also remove the EOL resistors? What is PAI btw? I disqualified a paradox upgrade because of the firmware version issues with the IP150.
  7. L

    Hass and IDS alarm integration

    This seems like the best option to me, you can integrate with legacy or replace legacy. https://konnected.io/
  8. L

    Hass and IDS alarm integration

    I See the Hyyp board has a serial connector to the main board, have you tried to reverse engineer this to possibly replace the hyyp with a pi?
  9. L

    [Personal Experiences] Hisense TV's

    Hi, any link where we can view the latest firmware for all models instead of specifically asking if there is an update al the time?
  10. L

    Home Automation - Smartkit

    I am also interested in these plates, would also like a plate that converts the US switch to a 120 x 120 size.
  11. L

    Home Automation - Smartkit

    There are 2, one for open and one for closed, so I have both options.
  12. L

    Home Automation - Smartkit

    Thanks!
  13. L

    Home Automation - Smartkit

    No, there is a switch on my gate that closes when the gate is closed. This switch controls a relay on the gate control board. So I want to use the same switch on GPIO14 to know when the gate is closed. There is however 5vdc on that switch to close the relay. I already have 12vdc from the...
  14. L

    Home Automation - Smartkit

    I have my garage and gate on 2 sonoff SVs with tasmota. Now I want to use the GPIO14 as a switch to control open/closed state. There is a switch on my gate setup for this already but it has 5vcd driving a relay connected to it. Will it be ok to connect the GPIO pin to this?
  15. L

    Home Automation - Smartkit

    The UK switches are smaller, I think the dimensions are 89mm x 89mm. So that will not fit on a 102mm x 102 mm wall box.
Top