ADSL installation - microfilter before or after the UPS

[MagicDude4Eva]

I am busy getting the ADSL line installed as we speak. I have a APC UPS (Back-UPS CS350) like this one.

At the back the UPS has a wall-in and a line-out. Do I run the phone-cable from the wall through the UPS and then on the UPS's line-out attach the microfilter/splitter or do I place the microfilter/splitter before it.

It would make sense to have the filter to attach on the line-out of the UPS as then the ADSL line goes into the UPS, any surges will be absorbed and on the lineout of the UPS the splitter/microfilter will feed off into the ADSL modem and the phone.

Your thoughts? Will there be any issues when doing this.

 

[mh348]

For the Phone Line, connect directly to the ups, from the ups you can connect a normal splitter, the one line from the splitter to the Router, on the other port of the splitter u can connect the microfilter and connect the phone to the filter.