airport base station choices

Stanley

New Member
Joined
May 2, 2004
Messages
2
Reaction score
0
Location
.
Our 128 kbs Senech hookup is fine but it is very limited as to where it can be placed in the house office and still receive a signal. We are therefore interested in installing an airport base station to go wireless from an optimised location.

But apparently, base stations are very different in terms of capacity and cost. The question I pose is simply this:
What is the best range and power one can get which will work off the sentech modem and work with G4 (Mac)laptop and a Dos laptop. Apple's airport base station for example, puts out 50 Milliwatts but is pretty much useles for penetrating a brick wall. I hear there are others that go up to 200 milliwatts and can penetrate same easily but I dont have any names much less the benefit of actual users like you yet. Anyone with experience and advice to offer will be most appreciated,

RJS / Paulshof
 
A good comparison of the various 802.11 AP's:
http://www.seattlewireless.net/index.cgi/HardwareComparison?action=highlight&value=dlink#head-b900ce0be4722e1a4fafbe8ad903651d54461f97


Since you're who I think you are, you will probably want to go for the Linksys type AP's which has now been acquired by Cisco. That should be right up your alley.

Note, that you'll have to use PPPoE with the modem, and get the custom modem Ethernet cable when connected to a Linksys AP/Router. From there, you'd bridge the PPPoE frames for the modem to your normal PPPoE capable router. The DLink DI-614+ is a nice all-rounder too.

As for suppliers in .za I'm not too sure.

<center><h5><font color="red">Oo. MyWireless <s>Hacks</s> Tweaks & Tech Info.oO </font id="red"></h5><h6>Have you checked the fawking FAQ?</h6></center>
 
Does anyone have thoughts on the Mecer wireless routers? Apparently there is a 54Mbps version (ARM904) for around R850-00. It seems to be a rebranded "something", but information can be found at http://www.ovislink.ca/wls/arm904.htm.

Good idea? Bad idea?

Your thoughts will be greatly appreciated!

Cheerio
 
Rodent,
Thanks for that. Will go shopping and contact you for installation assistance per our earlier tel con, if I have problems... RS
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by TheRoDent</i>
<br />
A good comparison of the various 802.11 AP's:
http://www.seattlewireless.net/index.cgi/HardwareComparison?action=highlight&value=dlink#head-b900ce0be4722e1a4fafbe8ad903651d54461f97


Since you're who I think you are, you will probably want to go for the Linksys type AP's which has now been acquired by Cisco. That should be right up your alley.

Note, that you'll have to use PPPoE with the modem, and get the custom modem Ethernet cable when connected to a Linksys AP/Router. From there, you'd bridge the PPPoE frames for the modem to your normal PPPoE capable router. The DLink DI-614+ is a nice all-rounder too.

As for suppliers in .za I'm not too sure.

<center><h5><font color="red">Oo. MyWireless <s>Hacks</s> Tweaks & Tech Info.oO </font id="red"></h5><h6>Have you checked the fawking FAQ?</h6></center>
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
 
Something to note, and I quote :

' Individual USB cables can run as long as 5 meters; with hubs, devices can be up to 30 meters (six cables' worth) away from the host. '

Obtained from the site http://computer.howstuffworks.com/usb.htm
 
Top
Sign up to the MyBroadband newsletter
X