auto connecting telkom router pots

[Darkdog]

Is there a way I can get the telkom router pots (ethernet single port) to connect automatically at windows startup? That is that I don't have to open the dialup box and connect manually.
config is two pc networked through a switch/hub and the adsl moden is connected to the hub.

 

[mbs]

With a Telkrap POTS router, you don't have to use dialup PPPoE at all. Make sure the unit is configured as a router and make sure your local net uses the router as a gateway - the default address is 192.168.10.200, and make sure that passwords are changed on the unit for all services. The router can be powered-up continuously and you should be able to connect from either PC as necessary, via your DSL account. If you have problems, post again, and some of the Windows forumites might help if you advise more detail of your setup (Windows version, firewall and port settings, etc.). I also recall that there are some postings on this forum that answer similar questions - do a search for this...