can't disconnec iSCSI targets, please help

SilverNodashi

Expert Member
Joined
Oct 12, 2007
Messages
3,340
Reaction score
48
Location
Johannesburg, South Africa
Hi,

I'm trying to disconnect some iSCSI targets, but can't seem to.

[root@localhost ~]# iscsiadm -m session
tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb
tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba
tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0
tcp: [5] 192.168.2.200:3260,1
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb



I need to disconnect all 4 of these

[root@localhost ~]# iscsiadm -m node -T 192.168.2.200:3260,1
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb -p 196.34.136.200
--logout



The target is still there, even though I tell it to disconnect.

[root@localhost ~]# iscsiadm -m session
tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb
tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba
tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0
tcp: [5] 192.168.2.200:3260,1
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb



I can't delete it either:
[root@localhost ~]# iscsiadm -m node --op delete --targetname
192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb
iscsiadm: no records found!



Restarting iscsi gives some odd errors:

[root@localhost ~]# /etc/init.d/iscsi restart
Logging out of session [sid: 1, target:
iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]
Logging out of session [sid: 3, target:
iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal:
192.168.2.200,3260]
Logging out of session [sid: 4, target:
iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]
Logging out of session [sid: 5, target:
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal:
192.168.2.200,3260]
Logout of [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal:
192.168.2.202,3260]: successful
Logout of [sid: 3, target:
iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal:
192.168.2.200,3260]: successful
Logout of [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal:
192.168.2.202,3260]: successful
Logout of [sid: 5, target:
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal:
192.168.2.200,3260]: successful
Stopping iSCSI daemon:
iscsid dead but pid file exists [ OK ]
Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: Logging in to [iface: default, target:
iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]
Logging in to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal:
192.168.2.200,3260]
Logging in to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal:
192.168.2.200,3260]
Logging in to [iface: default, target:
iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]
Logging in to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal:
192.168.2.200,3260]
Logging in to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal:
192.168.2.200,3260]
Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb,
portal: 192.168.2.202,3260]: successful
iscsiadm: Could not login to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal:
192.168.2.200,3260]:
iscsiadm: initiator reported error (19 - encountered non-retryable
iSCSI login failure)
Login to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal:
192.168.2.200,3260]: successful
Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0,
portal: 192.168.2.202,3260]: successful
Login to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal:
192.168.2.200,3260]: successful
iscsiadm: Could not login to [iface: default, target:
iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal:
192.168.2.200,3260]:
iscsiadm: initiator reported error (19 - encountered non-retryable
iSCSI login failure)
iscsiadm: Could not log into all portals. Err 19.


Interestingly, the targets which iscsi reports as not existing, does exist:

[root@localhost ~]# iscsiadm -m discovery -t sendtargets -p 192.168.2.200
192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb
192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba
192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb



Is there any other way to force these disconnects, and re-connect them?




The machine runs on CentOS 5.5 x64 + XEN:

[root@localhost ~]# cat /etc/redhat-release
CentOS release 5.5 (Final)
[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.18-194.el5xen #1 SMP Fri Apr 2
15:34:40 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost ~]#
 
This is driving me nuts! Does anyone know if this is a bug, or am I doing something wrong?

I searched the RHEL bug list, but can't find anything related to this. Some other people (via google search) seems to have simila problems, but I can't see any fixes on the web.

I can logout out of all sessions, but as soon as I restart iscsi, the sessions gets restored again:


[root@localhost ~]# fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 121584 976519057+ 8e Linux LVM

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 121584 976519057+ 8e Linux LVM

Disk /dev/sdc: 1084.4 GB, 1084480290816 bytes
255 heads, 63 sectors/track, 131847 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdc doesn't contain a valid partition table

Disk /dev/sdd: 539.7 GB, 539771273216 bytes
255 heads, 63 sectors/track, 65623 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdd1 1 65623 527116716 fd Linux raid autodetect

Disk /dev/sde: 536.8 GB, 536870912000 bytes
255 heads, 63 sectors/track, 65270 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sde doesn't contain a valid partition table

Disk /dev/sdf: 536.8 GB, 536870912000 bytes
255 heads, 63 sectors/track, 65270 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdf1 1 65270 524281243+ fd Linux raid autodetect

[root@localhost ~]# iscsiadm -m node -u
Logging out of session [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]
Logging out of session [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]
Logging out of session [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]
Logging out of session [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]
Logout of [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful
Logout of [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful
Logout of [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful
Logout of [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful

So, iscsi logs out of the targets, and fdisk -l confirms it:
[root@localhost ~]# fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 121584 976519057+ 8e Linux LVM

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 121584 976519057+ 8e Linux LVM

But as soon as I restart iscsi, it logs back-in:

[root@localhost ~]# /etc/init.d/iscsi restart
Stopping iSCSI daemon:
iscsid dead but pid file exists [ OK ]
Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]
Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260]
Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]
Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]
Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]
Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260]
Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful
iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260]:
iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure)
Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful
Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful
Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful
iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260]:
iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure)
iscsiadm: Could not log into all portals. Err 19.


Why?
Or, how do I completely get rid of them?
 
Top
Sign up to the MyBroadband newsletter
X