Cloudastrix and SIP

[magtech]

we have setup and Cloudastrix server with WHMCS ( needed by Cloudastrix ) and have reached the part to setup SIP trunks.

We have reached a point where we are a little lost as to how to setup the trunk to allow outbound calls. Inbound calls are not needed as the customers will only be using our custom app to make outbound calls globally.

Does anyone have experience in setting up SIP trunks in Cloudastrix?

How to we set up our VOIP in Cloudastrix so that customers can call each other for free for those that have our app installed?

We have setup a test trunk and our softphone can connect to it but no calls can be made.

We have purchased a trunk with didlogic as this will be the only provider we will use. If anyone can assist in setting the trunk up we would be grateful.

Kind Regards

 

[Vince0]

Vendor?

You should be asking the Cloudasterix vendor this.

 

[magtech]

I would as a last resort but they charge a fortune and provide no documentation to even read from.

 

[gfmalan]

How does the sip trunk config look? I know asterisk, but not so sure how cloudasterisk config look like

Do you have a graphic interface or do you edit the config files?

 

[magtech]

How does the sip trunk config look? I know asterisk, but not so sure how cloudasterisk config look like

Do you have a graphic interface or do you edit the config files?

Its a graphical interface. I could give you screen shots if you require

 

[magtech]

 

[mo_to]

I would as a last resort but they charge a fortune and provide no documentation to even read from.

Hello sir,

You will find the full GETTING STARTED GUIDE for CloudAstrix SPE online here:
http://my.cloudastrix.com/knowledgebase.php?action=displaycat&catid=18

You will find GENERAL TECH INFO on SPE here:
http://my.cloudastrix.com/knowledgebase.php?action=displaycat&catid=23

You will find how to setup a TRUNK for your provider here:
http://my.cloudastrix.com/knowledgebase.php?action=displayarticle&id=34

If you do not know what to fill in the boxes, your Provider will be able to give you support on the best settings to use.
The Softswitch provides hundreds of possible trunk settings.

CloudAstrix SPE is a Commercial Carrier Grade VoIP SoftSwitch integrated within WHMCS Billing System. It is recommended to obtain professional support and installation to ensure that your ISP/VoIP Business is setup with good infrastructure.

Please open a support ticket at http://my.cloudastrix.com/ for any further queries.