DLink DSL 2750 cant disable WAN access to router

[Sl33py]

Hi
I had two customers with DLink DSL 2750 that DNS settings got changed remotely. I logged in and changed it back, I also made sure the WAN access is disabled to the router, to my shock even though it is you can still access the router on the WAN port.

So I am forwarding port 80 to a non existing IP so you can access the Router on default port, it moves it then to port 8080.

Plus be aware that support password is support and user is user change them as well. Attached is a screen shot of my settings, not the IP at the top left.

I see the firmware on this router is quite old, does anyone know were i can find a change log fro the firmware updates?

 

[ThinkCentre]

All info can be found on D-Link's ftp site

If you have a retail version go here ftp://ftp.d-link.co.za/dsl2750u (Retail)/


If Telkom supplied your router, go here! ftp://ftp.d-link.co.za/dsl2750u (Telkom)/

 

[Sl33py]

I see the firm ware but not the change log to see what was fixed changed in each update

 

[ThinkCentre]

go to http://www.d-link.co.za/ to log a call if it is under warranty!

 

[modprobe]

All info can be found on D-Link's ftp site

If you have a retail version go here ftp://ftp.d-link.co.za/dsl2750u (Retail)/


If Telkom supplied your router, go here! ftp://ftp.d-link.co.za/dsl2750u (Telkom)/

These ftp links were useful to me. Thanks, ThinkCentre.

 

[creeper]

There was a problem with the support user with a standard password. Change the support user password (I think it is Telkom123456 for Telkom routers) to something more secure.

 

[SauRoNZA]

This is a known issue.

Just update the firmware and you are good to go.