DLink DSLAM-3248 can not be booted in CLI prompt

[rajen]

DSLAM 3248 PROBLEM : Please inform me what could be the possible fault and its remedial steps of the following DSLAM error message. If the problem is with the latest firmware please send that along with necessary steps when available. Please note if the problem can be solved by the presently available firmware if any, please send that along with the steps. Let me try

Status of the faulty DSLAM : Only power line LED on DSLAM 3248 is glowing. All other ADSL CPE LED Status are off and hence all ADSL connection gets down. The message that is displayed on the HyperTerminal screen when the computer serial port is connected to CID port on the ADSL IP DSLAM 3248 are:

Message that is displayed on the hyperterminal screen :
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1 i.e. we can not enter into CLI prompt “$”.

Note 1: Detailed message that is displayed on the hyperterminal screen :

*******************
Welcome to IP DSLAM
*******************

Press F1 to enter Interactive Mode, 'Enter' to skip ... 5 seconds left


Transfering Control to BootTftp binary

Flash Present In System
Flash size read in progress

Flash Address 0x00: 89

Flash Address 0x02: 16

Flash size: 4M

.......Flash size read successful...

g_u32FlashSize : 4194304

g_u32FlashBlockSize: 131072
.Calling Undo for block 3
............................
CP is not active
Primary Ethernet Interface for TFTP :- eth-0
Secondary Ethernet Interface for TFTP :- eth-1
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0

Primary Ethernet Interface for TFTP :- eth-0
Secondary Ethernet Interface for TFTP :- eth-1
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0


CP is not active
Columbia Package shall not be TFTPied

Do you want to force its TFTP... Y/N? n
Forced TFTP not requested

Press 'F/f' to perform forced TFTP of a file
'Enter' to skip ... 5 Seconds left

Press 'D/d' to debug the Control Plane using GDB
'Enter' to skip ... 5 Seconds left

User did not request for debugging Control Plane......Continuing


Primary Ethernet Interface for TFTP :- eth-0
Secondary Ethernet Interface for TFTP :- eth-1
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0
Could not TFTP on eth-0, reverting to eth-1
Could not TFTP on eth-1, reverting to eth-0


Note 2:
ADSL 3 manufacturing information:
MODEL=DAS-3248
P/N=DAS3248E..A1
S/N no=E203161000024
MAC ID UPLINK 1=0015E94DC3E0
MAC ID UPLINK 2=0015E94DC3E1
MAC ID MGNT =0015E94DC3E2

Firmware version = Software Release: 1.70.1000.ADSL2+ (COL2.10.2.0.051206) Date: Jul 6 2006

 

[The_Unbeliever]

Errrr... you realized where you've posted this?


Looks like the DSLAM lost its programming and need to be re-initialized.