FXS and FXO VOIP Hardware

[ikabot]

Hi there.

I'm in the market for an FXS and FXO ATA. Something along the lines of a Linksys SPA3000.

My primary need is an RJ11 FXO port and RJ45 ethernet interface. My application is [ answering service / call forwarding / fax receiving / fax sending ], so I don't need a lot of ports of various kinds.

Can anyone recommend a vendor who stocks something along these lines that would cost me somewhat less than ZAR1k and is available in Cape Town or can be shipped from elsewhere in South Africa?

Ikabot

 

[mister]

http://www.scoopdistribution.co.za/index.php/voip-ata-phones-c-98

http://www.evenflow.co.za/products/IP-Adapter/5/all/

 

[ikabot]

http://www.scoopdistribution.co.za/index.php/voip-ata-phones-c-98

http://www.evenflow.co.za/products/IP-Adapter/5/all/

Thanks for the links.

I'd had a look at the Scoop catalogue, but none of the products there offers an FXO port, which is my primary requirement.

Even Flow's range looks promising though. I think this might suit my needs: http://www.evenflow.co.za/prod/IP-PBX/Epygi/Epygi Quadro 2x/159

 

[mister]

The Epygi Quadro 2x is expensive.

A cheaper option would be the MyPBX Soho from scoop for R1995
http://www.scoopdistribution.co.za/product_info.php/mypbx-soho-p-1550

It's a complete PBX based on asterisk.

You then need to add in R495 for the FXO ports
http://www.scoopdistribution.co.za/product_info.php/fxo-station-interfaces-p-750

But if you want cheap I would go with the Linksys SPA 3102. It has 1 FXO & 1 FXS
http://www.evenflow.co.za/prod/VoIP-Adapters/Linksys/Linksys%20SPA%203102/155

Another cheapish Asterisk box with FXO ports is http://www.comx-computers.co.za/AT-IP02-Atcom-Two-FXO-Port-VoIP-PBX-Buy-p-66066.php

 

[ikabot]

Dude. You rock. Thanks for the continued guidance.