isie
Honorary Master
- Joined
- Jan 16, 2010
- Messages
- 13,267
- Reaction score
- 2,201
lol - that makes more sense
so back to to the PTC, which ever geyser has that element you need to check whats the story with the settings
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: What is your stance on AI?
Geyserwise Tuya
- Thread starter Mzezman
- Start date
so back to to the PTC, which ever geyser has that element you need to check whats the story with the settings
TheRidDlerX
Senior Member
Nee ma great, thank you very much. I'll try to do so after everything is in place. Appreciatelol - that makes more sense
so back to to the PTC, which ever geyser has that element you need to check whats the story with the settings
isie
Honorary Master
- Joined
- Jan 16, 2010
- Messages
- 13,267
- Reaction score
- 2,201
A little side question on PTC element - are you finding a 2kw ok for your geyser (im guessing because its pre warmed might help)
so going to be honest im very skeptical , i was looking at it to try and lower the geysers impact on the inverter , xtend claims a 2kw ptc is equivalent to a standard 3kw but geyserwise says its only about 25% more efficient then a standard 2KW
the comparative data on xtends site is Suspect
TheRidDlerX
Senior Member
Atm I still have a 3.5kW good ol thick unit that would suck a tennisball through a 10mm inverter cable so simply trying to scale it down so i can run it more constantly rather than make the whole garage vibrate for an hour and everyone has to wait before they can eat. I was looking at the 1.5kW initially but according to the reviews on Livestainable its just not cutting it and taking forever, albeit very power efficient so decided on the 2kW. Sal ma sien wat maak hy
Captain Slog
Expert Member
Hi gents, old thread, I know!
Has anyone got DP numbers and corresponding types etc for the Geyserwise Max1 Solar Hybrid? I have a partial table from trial-and-error and documentation found all over
Has anyone got DP numbers and corresponding types etc for the Geyserwise Max1 Solar Hybrid? I have a partial table from trial-and-error and documentation found all over
| DP | Name | Type | Unit (EU) | Device Class | Notes | Confirmed? | |
| 1 | Element1 | switch | — | — | On/off | No | |
| 2 | Mode? | select | — | — | Confirm available options as you go (Timer seen so far) | No idea | |
| 10 | Geyser Temp | sensor | °C | temperature | Confirmed live | Yes | |
| 13 | Boost Status | switch (or binary_sensor if read-only) | — | — | Check if it's user-controllable or just a status readout | No idea | |
| 20 | Fault Code | sensor | — (none) | — | Plain number, no unit | Maybe | |
| 101 | Pump1 | binary_sensor | Running / Stopped | — | Not Confirmed live | Is it this one? | |
| 102 | Solar Differential | number | °C | 0-15 | — | Confirmed live | Yes |
| 103 | Block 1 SP | number | °C | 0-75 | — | Confirmed live | Yes |
| 104 | Block 2 SP | number | °C | 0-75 | — | Confirmed live | Yes |
| 105 | Block 3 SP | number | °C | 0-75 | — | Confirmed live | Yes |
| 106 | Block 4 SP | number | °C | 0-75 | — | Confirmed live | Yes |
| 107 | Antifreeze SP | number | °C | 0-10 | — | Confirmed live | Yes |
| 108 | Collector Temp | sensor | °C | temperature | Confirmed live | Yes | |
| 109 | High-Limit Cutoff | number | °C | — | No |
Captain Slog
Expert Member
Need DPs 1, 2, 13, 20, 101, 109
Captain Slog
Expert Member
Do we think that the WBR3 module is not broadcasting the DPs for Pump running, element ON, runtime, Holiday/Normal to LocalTuya even if the cloud based SmartLife is getting them?
system32
Executive Member
This is what I found on GeyserWise TSE:
# '1' = Power On/Off
# '2' = Timer reason
# '10' = Temperature C
# '13' = Element On/Off
# '20' = Fault codes
# '101' = Positive temperature coefficient (Ptc) On/Off
# '102' = Ptc limit 65C
# '103' = Block 1 limit 65C
# '104' = Block 2 limit 65C
# '105' = Block 3 limit 65C
# '106' = Block 4 limit 65C
# '107' = Element runtime hr
I used https://github.com/jasonacox/tinytuya to read the DPS.
Had a issues with losing connectivity to the WiFi on Tuya.
Gave up and replaced the board with a GeyserWala https://www.thingwala.com/
Since then, I see there are few more options via https://store.smartpad.co.za/index.php/product-category/features/geyser-control/
Last edited: