Hacking Problem

[Zyraz]

Run netstat from cmd.
Might give you some basic info whether malware , spyware and viruses are generating any traffic.

-a Displays all active connections and the TCP and UDP ports on which the computer is listening.

-b (Windows) Displays the binary (executable) program's name involved in creating each connection or listening port. (Windows XP, 2003 Server and newer Windows operating systems; not Microsoft Windows 2000 or older).

-b (OS X, NetBSD) Causes -i to report the total number of bytes of traffic.

-e Displays ethernet statistics, such as the number of bytes and packets sent and received. This parameter can be combined with -s.

-f (Windows) Displays fully qualified domain names <FQDN> for foreign addresses (only available on Windows Vista and newer operating systems).

-f Address Family (FreeBSD) Limits display to a particular socket address family, unix, inet, inet6

-g Displays multicast group membership information for both IPv4 and IPv6 (may only be available on newer operating systems)

-i Displays network interfaces and their statistics (not available under Windows)

-m Displays the memory statistics for the networking code (STREAMS statistics on Solaris).

-n Displays active TCP connections, however, addresses and port numbers are expressed numerically and no attempt is made to determine names.

-o (Windows) Displays active TCP connections and includes the process ID (PID) for each connection. You can find the application based on the PID on the Processes tab in Windows Task Manager. This parameter can be combined with -a, -n, and -p. This parameter is available on Microsoft Windows XP, 2003 Server (and Windows 2000 if a hotfix is applied).[6]

-p protocol (Windows and BSD) Shows connections for the protocol specified by protocol. In this case, protocol can be tcp, udp, tcpv6, or udpv6. If this parameter is used with -s to display statistics by protocol, protocol can be tcp, udp, icmp, ip, tcpv6, udpv6, icmpv6, or ipv6.

-p (Linux) Show which processes are using which sockets (similar to -b under Windows) (you must be root to do this)

-P protocol (Solaris) Shows connections for the protocol specified by protocol. In this case, protocol can be ip, ipv6, icmp, icmpv6, igmp, udp, tcp, or rawip.

-r Displays the contents of the IP routing table. (This is equivalent to the route print command under Windows.)

-s Displays statistics by protocol. By default, statistics are shown for the TCP, UDP, ICMP, and IP protocols. If the IPv6 protocol for Windows XP is installed, statistics are shown for the TCP over IPv6, UDP over IPv6, ICMPv6, and IPv6 protocols. The -p parameter can be used to specify a set of protocols.

-t (Linux) Display only TCP connections.

-W (FreeBSD) Display wide output - doesn't truncate hostnames or IPv6 addresses

-v (Windows) When used in conjunction with -b it will display the sequence of components involved in creating the connection or listening port for all executables.
Interval Redisplays the selected information every Interval seconds. Press CTRL+C to stop the redisplay. If this parameter is omitted, netstat prints the selected information only once.

-h (unix)

/? (windows) Displays help at the command prompt.

 

[d7e7r7]

Change router password
/snip

This /\
It's scary how many routers have default usernames and passwords locally. Logging into a router over the internet, an attacker can steal your ADSL login details, change your DNS settings and much more...

 

[GforceD]

you've downloaded an botnet trojan and now your pc is part of a hivemind server farm (likely Chinese run), its probably involved in all sorts of nefarious hacking activities now. Is you pc slower than normal?

Unfortunately its probably infested your whole ecosystem anything you connected on to your wifi, since it writes its self to the firmware of the router you need to turn off all device connected to your wifi, cellphone pc laptop tablets, they all now have this botnet virus. You need to get rid of all these devices and you cannot copy anything over to your new devices or this will just spread to your new system. Make sure you airgap your new system before you install your router and set it up according to microsoft's antivirus guidelines.
Also name your wifi AP something like {INFECTED Zoombienes VIRUS}

Then get 3 chickens, the chickens should eat any bugs before they get inside your system.

Good Luck!