Help needed connect to internet

D

Dolphin71

Member
Joined
Jan 19, 2007
Messages
14
Reaction score
0
Hi I need help how to connect to the internet via my cellphone on Linux - using Fedora Core 5 using MTN.

psichron posted a thread at link
and I tried it, now I can see on my Nokia Communicator (9300) that I'm connected but :mad: can't browse at all

I do not see any errors in the /var/log/messages just this msg only this one
:confused: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
when trying to connect.

Screen dump when connecting:
[root@localhost ~]# sudo pppd call gprs
Press CTRL-C to close the connection at any stage!
defining PDP context...
rAT
OK
ATH
OK
ATE1
OK
AT+CGDCONT=1,"IP","myMtn","",0,0
OK
waiting for connect...

ATD*99#
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa567e909>]
rcvd [LCP ConfRej id=0x1 <magic 0xa567e909>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
sent [LCP ConfRej id=0x0 <auth pap>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
sent [IPCP ConfNak id=0x0 <addr 10.0.0.1>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
rcvd [IPCP ConfNak id=0x1 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
sent [IPCP ConfReq id=0x2 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
rcvd [IPCP ConfReq id=0x1 <addr 10.0.0.1>]
sent [IPCP ConfAck id=0x1 <addr 10.0.0.1>]
rcvd [IPCP ConfAck id=0x2 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
local IP address 172.27.55.0
remote IP address 10.0.0.1
primary DNS address 209.212.96.1
secondary DNS address 209.212.97.1
Script /etc/ppp/ip-up started (pid 2466)
Script /etc/ppp/ip-up finished (pid 2466), status = 0x0

I am not sure if there are more SELinux services that I must disable,
Did disable SELinux for bluetooth.

Can anyone please assist?
 
Dolphin71 said:
Hi I need help how to connect to the internet via my cellphone on Linux - using Fedora Core 5 using MTN.

psichron posted a thread at link
and I tried it, now I can see on my Nokia Communicator (9300) that I'm connected but :mad: can't browse at all

I do not see any errors in the /var/log/messages just this msg only this one
:confused: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
when trying to connect.

Screen dump when connecting:
[root@localhost ~]# sudo pppd call gprs
Press CTRL-C to close the connection at any stage!
defining PDP context...
rAT
OK
ATH
OK
ATE1
OK
AT+CGDCONT=1,"IP","myMtn","",0,0
OK
waiting for connect...

ATD*99#
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa567e909>]
rcvd [LCP ConfRej id=0x1 <magic 0xa567e909>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
sent [LCP ConfRej id=0x0 <auth pap>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
sent [IPCP ConfNak id=0x0 <addr 10.0.0.1>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
rcvd [IPCP ConfNak id=0x1 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
sent [IPCP ConfReq id=0x2 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
rcvd [IPCP ConfReq id=0x1 <addr 10.0.0.1>]
sent [IPCP ConfAck id=0x1 <addr 10.0.0.1>]
rcvd [IPCP ConfAck id=0x2 <addr 172.27.55.0> <ms-dns1 209.212.96.1> <ms-dns3 209.212.97.1>]
local IP address 172.27.55.0
remote IP address 10.0.0.1
primary DNS address 209.212.96.1
secondary DNS address 209.212.97.1
Script /etc/ppp/ip-up started (pid 2466)
Script /etc/ppp/ip-up finished (pid 2466), status = 0x0

I am not sure if there are more SELinux services that I must disable,
Did disable SELinux for bluetooth.

Can anyone please assist?
Click to expand...

Good day,

I've sent this off to one of my colleagues as my Linux is a little rusty

Will advise ASAP - More than likely Monday but if anyone else can help you in the meantime I'd appreciate it

MTNDD
 
Log with SELinux disabled

Hi,

I've disabled SELinux & the firewall and tried again, watching /var/log/messages

Get : Starting security manager 0 after inserting the bt dongle.
Then a bit later on some stuff about gconfd.
GConf server is not in use, shutting down.
Exiting

Further the results are the same as the previous. If I want to browse on my phone I still need to reboot it otherwise it takes forever.

What I could figure out from GConf that it keeps track of sware preferences. My question must it run? And if so help me pleez.

Extract from messages:
Jan 19 22:09:58 localhost kernel: Bluetooth: HCI USB driver ver 2.9
Jan 19 22:09:58 localhost hcid[1644]: HCI dev 0 registered
Jan 19 22:09:58 localhost kernel: usbcore: registered new driver hci_usb
Jan 19 22:09:58 localhost hcid[1644]: HCI dev 0 up
Jan 19 22:09:58 localhost hcid[1644]: Starting security manager 0
Jan 19 22:12:36 localhost gconfd (root-2275): SIGHUP received, reloading all databases
Jan 19 22:12:36 localhost gconfd (root-2275): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Jan 19 22:12:36 localhost gconfd (root-2275): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Jan 19 22:12:36 localhost gconfd (root-2275): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Jan 19 22:12:36 localhost gconfd (root-2275): GConf server is not in use, shutting down.
Jan 19 22:12:36 localhost gconfd (root-2275): Exiting
Jan 19 22:15:54 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
 
I got bluetoothed!!

Threw the bt dongle in the draw and pulled out the dku2 cable.

Could not come right with wvdial so tried KPPP. Left all the default settings except
change modem obviously to dev/ttyACM0 &
Init String2 to: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
And wallah...
Will try later to get the bluetooth going:eek:
 
Dolphin71 said:
Threw the bt dongle in the draw and pulled out the dku2 cable.

Could not come right with wvdial so tried KPPP. Left all the default settings except
change modem obviously to dev/ttyACM0 &
Init String2 to: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
And wallah...
Will try later to get the bluetooth going:eek:
Click to expand...

Hi Dolphin71,

This will have to be traced out to see if the connection is established correctly, the modem strings below should work, however there are better ways of connecting to GPRS via the AT command line. See below. If there is still a problem, PM me your cell phone number, and we can put a session trace on his number and determine if the setup is completed correctly.



- the CGATT command will tell the unit to attach, or detach from the GPRS network. (not always necessary, as the CGACT command will force an attach).
- the CGACT command will initiate a connection to the GPRS network (replaces ATD)

The document for the nokia handset is attached as well. (this may differ slightly between manufacturers).

Thus to connect,

at+cgdcont=1,"IP","mymtn","",0,0
at+cgact=1,1
where 1st 1 is state (0 or 1) and the second 1 is the CID as specified in the cgdcont command.
to check status:- at+cgact?
to disconnect:- at+cgact=0,1







11.7 AT+CGATT GPRS Attach or Detach
3GPP 27.007 Section 10.1.9 /2/. The execution command is used to attach the MT to, or detach the MT from, the GPRS service. Any active PDP contexts will be automatically deactivated when the attachment state changes to detached.


Command
Response

+CGATT= <state>

+CGATT?
+CGATT: <state>



AT Command Set For Nokia GSM And WCDMA Products 86 Forum.Nokia.com


+CGATT=?
+CGATT: (0-1)





Table 11.7: AT+CGATT


11.8 AT+CGACT PDP Context Activate or Deactivate



3GPP 27.007, Section 10.1.10 /2/. The execution command is used to activate or deactivate the specified PDP context(s). <cid>: is a numeric parameter which specifies a particular PDP context definition.

Command
Response

+CGACT= [<state> [,<cid>[,<cid>[,..]]]

+CGACT?
+CGACT: <cid>, <state>[<CR><LF>+CGACT: <cid>, <state>[...]]

+CGACT=?
+CGACT: (0-1)





Table 11.8: AT+CGAT

Thanks MTNDD
 
Linux is all fine and well, but then you get to stuff like this. I rather prefer a Windows pc where everything just works for general use. Linux has just too little support and too much setup work to replace Windows for general use in the near future.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X