How do these line stats look?

[Prof.Merlin]

Please tell me what you think of these line stats. Line keeps dropping every few minutes:

Modem Status

Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 4096
US Margin 13
DS Margin 10
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 42
US Line Attenuation 25
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 1
CRC Tx Fast 1
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
DSL Statistics

Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

Thanks

 

[magneto]

yor DS Line Attenuation of 42 is quite high....

Attenuation refers to resistance. If this value is high, then the signal quality is low, and vice versa. Is the customer far away from the exchange? Long copper lines could be the cause of attenuation. A value above 55 dB is of concern (bad).

 

[Prof.Merlin]

Well its our line. We only about 1km away from the exchange. Our line went dead for a while this morning then came back up with these stats

Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 4096
US Margin 14
DS Margin 12
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 41
US Line Attenuation 24
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 2986
CRC Tx Fast 535
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path

Seems the same as before, but havent lost sync once in the past 2 hours. usually we lose sync every 10 minutes

 

[Just_Ice]

Maybe it was just big noise spikes on your line that have been sorted out.