How to connect to your iburst modem

[w1z4rd]

In my quest on how to interface with the iburst modem and edit certain settings, I have come across these instructions:

1. IP to set 192.168.250.11
2. Any terminal program set to TCP or USB at 192.168.250.10 Port 1234
3. Command to access - <rfScan debug 2>
4. BScc - Tower Nr. , Cost – signal level in dB
5. Bscc 1 – Sanlam Center, 2 – Northcliff. Avoid these
6. Signal level -60/-70 VERY strong, -70/-80 strong, -80/-90 – good – 100% speed, -90/-100 weak – antenna required.
7. When finished - <rfScan debug 0>, <reboot>

Anyone got the skillz on how to change the utid?

 

[Unchained]

In my quest on how to interface with the iburst modem and edit certain settings, I have come across these instructions:

1. IP to set 192.168.250.11
2. Any terminal program set to TCP or USB at 192.168.250.10 Port 1234
3. Command to access - <rfScan debug 2>
4. BScc - Tower Nr. , Cost – signal level in dB
5. Bscc 1 – Sanlam Center, 2 – Northcliff. Avoid these
6. Signal level -60/-70 VERY strong, -70/-80 strong, -80/-90 – good – 100% speed, -90/-100 weak – antenna required.
7. When finished - <rfScan debug 0>, <reboot>

Anyone got the skillz on how to change the utid?

This is the basis of the monitoring apps... Also documented at http://www.unchained.co.za (/iBurst)

Is it firstly possible to change the UTID? Or is it burnt in? Ie, does anyone know of a UTID that has been changed with software?

Also try the help command, will tell you how to get more specific help, but be careful, very careful...

 

[Tjorriemorrie]

In my quest on how to interface with the iburst modem and edit certain settings, I have come across these instructions:

1. IP to set 192.168.250.11
2. Any terminal program set to TCP or USB at 192.168.250.10 Port 1234
3. Command to access - <rfScan debug 2>
4. BScc - Tower Nr. , Cost – signal level in dB
5. Bscc 1 – Sanlam Center, 2 – Northcliff. Avoid these
6. Signal level -60/-70 VERY strong, -70/-80 strong, -80/-90 – good – 100% speed, -90/-100 weak – antenna required.
7. When finished - <rfScan debug 0>, <reboot>

Anyone got the skillz on how to change the utid?

can you explain the fscan debug more please.

And what do you mean with no 5? I'm connected to Northcliff! What's the problem?

 

[Crash]

This should help you
http://sourceforge.net/project/showfiles.php?group_id=144312&package_id=161353&release_id=358426

Northcliff used to service a large area and had far to many users on it.
With all the extra towers nowadays things may have changed.

Northcliff Tower used to suck badly.
Not on it anymore though.

WHY THE HECK DO YOU want to change the UTID?