Huawei E5331 as failover for ASUS DSL-N12U router

[NeoChroN]

Hi.
Is there anybody that might know if it is possible to use the E5331 as a failover device on the ASUS DSL-N12U?
With my limited knowledge, I started fiddling around a bit, but in this case the mighty google is not showing me the way forward. Following is an extract from the router log.

Dec 31 12:01:25 USB device: usb device HUAWEI Mobile(12d1/14fe/35) plugged
Dec 31 12:01:26 DSL-N12U: logmessage starts
Dec 31 12:01:26 3G_Scripts: HUAWEI Mobile 0x12d1 0x14fe
Dec 31 12:01:26 DSL-N12U: get_device_id starts
Dec 31 12:01:26 DSL-N12U: get_device_id starts
Dec 31 12:01:26 DSL-N12U: logmessage starts
Dec 31 12:01:26 3G_Scripts: get device 0x12d1 / 0x14fe
Dec 31 12:01:26 WAN Connection: The cable for Ethernet was not plugged in.
Dec 31 12:01:27 pppd[357]: Timeout waiting for PADO packets
Dec 31 12:01:27 pppd[357]: Unable to complete PPPoE Discovery
Dec 31 12:01:28 USB device: class 35, product 12d1/14fe/ 1.02 was plugged in.
Dec 31 12:01:33 DSL-N12U: logmessage starts
Dec 31 12:01:33 3G_Scripts: switch mode (general)
Dec 31 12:01:37 pppd[357]: send (sendPacket)
Dec 31 12:01:37 pppd[357]: recv (receivePacket)
Dec 31 12:01:42 pppd[357]: send (sendPacket)
Dec 31 12:01:47 DSL-N12U: get_device_id starts
Dec 31 12:01:47 DSL-N12U: get_device_id starts
Dec 31 12:01:47 DSL-N12U: get_modem_node starts
Dec 31 12:01:47 DSL-N12U: logmessage starts
Dec 31 12:01:47 3G_Scripts: get node: 1
Dec 31 12:01:52 pppd[357]: send (sendPacket)
Dec 31 12:01:52 DSL-N12U: logmessage starts
Dec 31 12:01:52 3G_Scripts: check PIN code failed
Dec 31 12:01:52 DSL-N12U: stop3g starts

 

[Dan C]

Maybe it's the same problem as this :

http://mybroadband.co.za/vb/showthread.php/558095-Afrihost-as-3g-Fail-over