I need a carpenter to make this: (3D Model)

[marhsava]

That's not the inside. The double doors close the right side. The left side are open shelves.
View attachment 1558375

You have a nice wife ...

 

[rh1]

You just need a drill, drill bit for pilot holes, an adapter to put a driver bit in the drill for driving the screws in, tape measure for making sure things are square before locking it in place with the backboard for which you need a hammer.. basic tools which really should be in every household..

the rest is just patience and a good helping hand to keep everything tight and aligned while drilling and screwing..

If you were up to doing it yourself, the material cost would have been roughly 2k..

If one man: Clamps and right hand clamp squares:

Alternatively, I had succes with a set of clamping jigs I bought at Timber City last year for about R150. It keeps to boards together so that you can glue and screw.

Travelling for work atm will take pictures when I am at home this weekend.

 

[leon.davibe]

Whats up with the photos/frames inside the cupboard ? ... even the plant for that matter

and the vr set not

I also thought this but i suppose it was just space ie the top is full there wasn't space for one more

 

[DapperDanMan]

I need a carpenter

You need Jesus.
#JesusTakeTheSawWheel

 

[rh1]

If one man: Clamps and right hand clamp squares:View attachment 1558635

Alternatively, I had succes with a set of clamping jigs I bought at Timber City last year for about R150. It keeps to boards together so that you can glue and screw.

Travelling for work atm will take pictures when I am at home this weekend.

The right clamp square (red) and the plastic jigs, the set has four of each.