Tazz_Tux
Linux Guru
And after running modprobe ?
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: Which is the most hair-raising South African mountain pass you've driven?
Linux - HOWTO (With Stats)
- Thread starter Tazz_Tux
- Start date
- Status
And after running modprobe ?
Still problems with huawei e220 ................
They are successful to make to work huawei e220 with mandriva 2007 (I have at least seems that it is connected), but I have the lowest exchange given, much not to visualize nothing on the broswer. I use Vodafon Italy and this is mine wdial: it would have to be right, but I do not understand perche has this slow operation cosi. Have you one solution?
y wvdial.conf
# cat /etc/wvdial.conf
al for Vodacom Data. Created by Tazz_tux
# Version 1.0
# Change Log:
#
# Added support for HSDPA.
# Added Headers and version control.
[Dialer hsdpa]
Phone = *99***16#
Username = vodafone
Password = vodafone
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB0
Baud = 460800
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Init5 =AT+CGDCOUNT=1,"IP","web.omnitel.it"
It's OK?
They are successful to make to work huawei e220 with mandriva 2007 (I have at least seems that it is connected), but I have the lowest exchange given, much not to visualize nothing on the broswer. I use Vodafon Italy and this is mine wdial: it would have to be right, but I do not understand perche has this slow operation cosi. Have you one solution?
y wvdial.conf
# cat /etc/wvdial.conf
al for Vodacom Data. Created by Tazz_tux
# Version 1.0
# Change Log:
#
# Added support for HSDPA.
# Added Headers and version control.
[Dialer hsdpa]
Phone = *99***16#
Username = vodafone
Password = vodafone
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB0
Baud = 460800
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Init5 =AT+CGDCOUNT=1,"IP","web.omnitel.it"
It's OK?
Last edited:
oscarperpi
New Member
- Joined
- Jan 8, 2007
- Messages
- 7
- Reaction score
- 0
Here it is.
Code:
# modprobe usbserial vendor=0xaf0 product=0x6300
# lsmod
Module Size Used by
usbserial 27176 0
8250_pci 19904 0
ipw2200 92268 0
8250_pnp 8576 0
8250 20628 2 8250_pci,8250_pnp
serial_core 19328 1 8250
snd_intel8x0m 15756 0
nvidia 4545236 12Banal question.....
Excused the banal question, but me rises a doubt. They are a principiante, after several tests of examples finds to you on the forum are successful to connect to me with my huawei e220, the doubt that I have, tightens it that I have in mine wvdial and be written from you. I dress in Italy it tightens goes well also for Italy or I am connecting myself outside of my country, this el mine wvdial:
cat /etc/wvdial.conf
al for Vodacom Data. Created by Tazz_tux
# Version 1.0
# Change Log:
#
# Added support for HSDPA.
# Added Headers and version control.
[Dialer hsdpa]
Phone = *99***1#
Username = username
Password = password
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB1
Baud = 460800
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Init5 = AT+CGDCONT=1,"IP","internet"
the problem can have had to tightens:
nit5 = AT+CGDCONT=1,"IP","internet"
Excused ancopra if I say of the absurd things.
Excused the banal question, but me rises a doubt. They are a principiante, after several tests of examples finds to you on the forum are successful to connect to me with my huawei e220, the doubt that I have, tightens it that I have in mine wvdial and be written from you. I dress in Italy it tightens goes well also for Italy or I am connecting myself outside of my country, this el mine wvdial:
cat /etc/wvdial.conf
al for Vodacom Data. Created by Tazz_tux
# Version 1.0
# Change Log:
#
# Added support for HSDPA.
# Added Headers and version control.
[Dialer hsdpa]
Phone = *99***1#
Username = username
Password = password
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB1
Baud = 460800
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Init5 = AT+CGDCONT=1,"IP","internet"
the problem can have had to tightens:
nit5 = AT+CGDCONT=1,"IP","internet"
Excused ancopra if I say of the absurd things.
Tazz_Tux
Linux Guru
This one has me...I have no idea why it won't detect it...
Tazz_Tux
Linux Guru
My only answer I can give is that you are on GPRS and note 3G/HSDPA - is the light green or blue ?
Tazz_Tux
Linux Guru
Hi - I am sorry, but I don't understand the question. Do you have a problem with the Init5 line ?
That is the normal for South Africa - it might need to change for Italy ?
I must change init5. lunico .era way in order to make to work it. Excuse for question before, but the domand it meant to ask if with lanit5 = AT+CGDCONT=1, “IP”, “Internet " my modem is connected to an Italian serveur, therefore normal logon, or connects with a foreign serveur and me meeting to spend sums high of logon.
Ok - run this commandCode:modprobe usbserial vendor=0x0bb4 product=0x00cf
That should bring the device up on /dev/ttyUSB0
I can't believe what an idiot I am ... I tried the before, but I left out the 0x on both ... hence it now working previously.
Works now
Thanks
CyberBOB
Tazz_Tux
Linux Guru
I can't believe what an idiot I am ... I tried the before, but I left out the 0x on both ... hence it now working previously.
Works now
Thanks
CyberBOB
We all allowed 5 mistakes per hr
oscarperpi
New Member
- Joined
- Jan 8, 2007
- Messages
- 7
- Reaction score
- 0
I have checked the card with a Ubuntu Live-CD (which uses kernel 2.6.17). After running modprobe option the card is correctly detected, and four /dev/ttyUSB* are created. So I suppose I have to update my kernel which is now 2.6.16
Oscar.
We all allowed 5 mistakes per hr
OK, I've finally gotten around to actually trying to dial with my JJ on linux ... and it doesn't work
when I try to use wvdial (wvdial jasjar internet) I get the following ...
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
here is the contents of my wvdial.conf file ...
# wvdial for Vodacom Data. Created by Tazz_tux
# Version 1.1
# Change Log:
#
# Changed the dialers to name_model
# Added support for HSDPA.
# Added Headers and version control.
[Dialer Defaults]
Phone = *99***1#
Username = username
Password = password
Stupid Mode = 1
Dial Command = ATDT
[Dialer pin]
#Init1 = AT+CPIN=1234
[Dialer jasjar]
Modem = /dev/ttyUSB0
Baud = 460800
Init2 = ATZ
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
ISDN = 0
Modem Type = Analog Modem
[Dialer 2gonly]
Init4 = AT+COPS=0,0,"Vodacom-SA",0
[Dialer 3gonly]
Init4 = AT+COPS=0,0,"Vodacom-SA",2
[Dialer internet]
Init5 = AT+CGDCONT=1,"IP","internet"
[Dialer internetvpn]
Init5 = AT+CGDCONT=1,"IP","internetvpn"
[Dialer 384k]
Init6 = AT+CGEQMIN=1,4,64,384,64,384
Init7 = AT+CGEQREQ=1,4,64,384,64,384
[Dialer 144k]
Init6 = AT+CGEQMIN=1,4,64,144,64,144
Init7 = AT+CGEQREQ=1,4,64,144,64,144
[Dialer 64k]
Init6 = AT+CGEQMIN=1,4,64,64,64,64
Init7 = AT+CGEQREQ=1,4,64,64,64,64
Also, I can't talk to it through minicom either. I don't ever see any kind of response on the WModem application either.
Any help would be appreciated
CyberBOB
General Linux Cell Data wikipage
At the CLUG wiki, we've had a general page on this subject, for a while:
http://wiki.clug.org.za/wiki/GPRS
At the CLUG wiki, we've had a general page on this subject, for a while:
http://wiki.clug.org.za/wiki/GPRS
willieb
Member
Still can't get huewei e620 working
Originally Posted by willieb
I run a dual boot winxp/ubuntu 6.06lts. The card work ok in win, but can't get it to work in linux. my data card is run on my PC on a RoHS PTC101OR Ver 1.0 card in a pci slot. the linux kernel is 2.6.13.
my wvconf is as per tazz_tux. when i run wvdial hsdpa internet i get the same error as most. #cannot open /dev/modem: no such file or directory.
what now? where could i look for the fault
Originally Posted by willieb
I run a dual boot winxp/ubuntu 6.06lts. The card work ok in win, but can't get it to work in linux. my data card is run on my PC on a RoHS PTC101OR Ver 1.0 card in a pci slot. the linux kernel is 2.6.13.
my wvconf is as per tazz_tux. when i run wvdial hsdpa internet i get the same error as most. #cannot open /dev/modem: no such file or directory.
what now? where could i look for the fault
Unable to connect Huawei E220 usb modem to my 3G broadband network
I am based in Singapore. I just bought a Huawei E220 HSDPA USB Modem to connect to my 3G broadband network. I am trying to make it work from my Fedora Core 6.
I got useful tips from the earlier posts on how to configure my system for this purpose. I was able to load the usbserial module and the device shows up in /dev/ttyUSB0. When I do wvdial hsdpa , the communication with the modem proceeds to the stage of CHAP authentication but fails in IPCP config request stage.
The device works fine with Windows XP. I have the ethereal capture of PPP negotiations for Windows XP that I can send you if needed.
Following is my wvdial.conf:
Following is the terminal output:
Following is the /var/log/mesages output:
Please help me.
-Prashant
I am based in Singapore. I just bought a Huawei E220 HSDPA USB Modem to connect to my 3G broadband network. I am trying to make it work from my Fedora Core 6.
I got useful tips from the earlier posts on how to configure my system for this purpose. I was able to load the usbserial module and the device shows up in /dev/ttyUSB0. When I do wvdial hsdpa , the communication with the modem proceeds to the stage of CHAP authentication but fails in IPCP config request stage.
The device works fine with Windows XP. I have the ethereal capture of PPP negotiations for Windows XP that I can send you if needed.
Following is my wvdial.conf:
Following is the terminal output:
Following is the /var/log/mesages output:
Please help me.
-Prashant
Tazz_Tux
Linux Guru
Hey Cyberbob,
I have requested a jamjar to allow me to set it up and test. I will advise asap
Laterz !
Tazz_Tux
Linux Guru
Hi willieb,
Two things:
- Did you run the modprobe command at the start
- What does your wvdial.conf look like
Laterz !
Tazz_Tux
Linux Guru
Hi pragr,
Are you sure that your init5 is correct? That is the APN we use in South Africa - maybe it's diff. for you ?
Laterz !
Re:Unable to connect Huawei E220 usb modem to my 3G broadband network
Thanks Tazz_Tux. It was indeed incorrect. My service provider is M1, Singapore and the APN is "sunsurf" which I later discovered by googling. I can now connect to the network.
-Prashant
Thanks Tazz_Tux. It was indeed incorrect. My service provider is M1, Singapore and the APN is "sunsurf" which I later discovered by googling. I can now connect to the network.
-Prashant
hi,
i`v got a question about the connection speed of the Novatel U740. i`m using HSDPA.
when i`m downloading a file with windows i`ve got an average speed of 160KByte. with linux (Ubuntu 6.10) i`ve got only 60KByte. i set up the connection speed from the pppd, but no response.
the same problem exist with the 3G Easybox and the Novatel UX870.
whats the problem about, and how could i fix this?
i`v got a question about the connection speed of the Novatel U740. i`m using HSDPA.
when i`m downloading a file with windows i`ve got an average speed of 160KByte. with linux (Ubuntu 6.10) i`ve got only 60KByte. i set up the connection speed from the pppd, but no response.
the same problem exist with the 3G Easybox and the Novatel UX870.
whats the problem about, and how could i fix this?
- Status