Marconi Rooter

[Hurricane]

Hi

I need some help with setting up a Marconi switch.

Firstly I cannot fiddle with Pvc0 because it is used by my work to establish a connection. I have tried to configure Pvc1 with my axxess details but Pvc1 refuses to connect if Pvc0 isn't removed.

Please help !


PVC 0 settings

Virtual Circuit: Enabled
Bridge: Enabled
IGMP: Disabled
Encapsulation: 1483 Bridged IP LLC

ATM settings
VPI: 8
VCI: 35

PVC1 settings

Virtual Circuit: Enabled
Bridge: Disabled
IGMP: Disabled
Encapsulation: PPPoE LLC

ATM settings
VPI: 8
VCI: 35

The problem being if I disabled Virtual Circuit on PVC 0 the PVC1 connects but with virtual circuit disabled on PVC 0 I can't connect to my work stuff

 

[daffy]

PVC is an ATM Term.
Its used to define which "layer" of the ATM Network you want to use.

You cant have 2 PVC's with the same VCI and VPI values.

 

[Hurricane]

Changed the settings as follows still doesn't work.

PVC 0 settings

Virtual Circuit: Enabled
Bridge: Enabled
IGMP: Disabled
Encapsulation: 1483 Bridged IP LLC

ATM settings
VPI: 8
VCI: 35

PVC1 settings

Virtual Circuit: Disabled
Bridge: Disabled
IGMP: Disabled
Encapsulation: PPPoE LLC

ATM settings
VPI: 9
VCI: 36

The other option would be to setup axxess via the telkom connection software. Thus not using the router software.
If some one could explain to me how to do this I tried just entering my username and password but it didn't work.

 

[daffy]

Well that definately wont work, because the ADSL network is 8/35.

 

[Hurricane]

Okay

So can some explain to me how I setup an Axxess account via windows.

Thanks

 

[SexyMaster]

ermbig problemo

firstly if bridged is not checked you can dialup as much as you want it gonna go nowhere. Secondly install the telkom software and set it up like a normal dialup, worx for me....

Okay

So can some explain to me how I setup an Axxess account via windows.

Thanks