Mega 100WR2 - Original firmware

[milomak]

Is there an earlier fimware version than 99.70.1? If so where can I get it?

 

[2C Telecoms]

Sorry Milomak, that was the first release version...

I could send you any nunber of the pre-release versions (and there were plenty of those..) but obviously, they were not up to standard, which is
why they were not released !

Any particular reason for you needing an earlier version ?

 

[milomak]

When I create more than one login and I do a ping from a linux login I get the following problem:

# ping www.google.com
PING www.l.google.com (64.233.189.104): 56 data bytes
64 bytes from 64.233.189.104: icmp_seq=0 ttl=246 time=320.0 ms
64 bytes from 64.233.189.104: icmp_seq=0 ttl=246 time=1330.0 ms (DUP!)
64 bytes from 64.233.189.104: icmp_seq=1 ttl=246 time=1010.0 ms
64 bytes from 64.233.189.104: icmp_seq=1 ttl=246 time=2020.0 ms (DUP!)
64 bytes from 64.233.189.104: icmp_seq=2 ttl=246 time=2020.0 ms
64 bytes from 64.233.189.104: icmp_seq=2 ttl=246 time=3030.0 ms (DUP!)
64 bytes from 64.233.189.104: icmp_seq=3 ttl=246 time=3030.0 ms
64 bytes from 64.233.189.104: icmp_seq=3 ttl=246 time=4040.0 ms (DUP!)

And it seems that it causes the speed on a download thread to be halved. Curiously the problem does not happen from a windows login.

So I was wanting to check whether this was a firmware related issue as I updated to the one on the telkomphones website and I was unsure as to whether that was the original or not.

 

[2C Telecoms]

When you talk of a linux login , are you refering to a login to the router or from a linux workstation ? obviously, the windows login can only be from a workstation ...

 

[milomak]

If I run a ping from a linux workstation that's the output. I'll run it from the router this evening to see what the output is.

 

[milomak]

[root:~#] telnet 10.0.0.2
Trying 10.0.0.2...
Connected to 10.0.0.2.
Escape character is '^]'.

BusyBox on localhost login: root
Password:
DSL Modem CLI
Copyright (c) 2004 Texas Instruments, Inc.
cli> shell

Starting /bin/sh
Type exit to return to the CLI


BusyBox v0.61.pre (2006.11.03-09:13+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

# ping www.iol.co.za
PING www.iol.co.za (196.30.168.79): 56 data bytes
64 bytes from 196.30.168.79: icmp_seq=0 ttl=53 time=170.0 ms
64 bytes from 196.30.168.79: icmp_seq=0 ttl=53 time=1180.0 ms (DUP!)
64 bytes from 196.30.168.79: icmp_seq=1 ttl=53 time=1010.0 ms
64 bytes from 196.30.168.79: icmp_seq=1 ttl=53 time=2020.0 ms (DUP!)
64 bytes from 196.30.168.79: icmp_seq=2 ttl=53 time=2020.0 ms
64 bytes from 196.30.168.79: icmp_seq=2 ttl=53 time=3030.0 ms (DUP!)
64 bytes from 196.30.168.79: icmp_seq=3 ttl=53 time=3030.0 ms
64 bytes from 196.30.168.79: icmp_seq=3 ttl=53 time=4040.0 ms (DUP!)

--- www.iol.co.za ping statistics ---
8 packets transmitted, 4 packets received, 4 duplicates, 50% packet loss
round-trip min/avg/max = 170.0/2062.5/4040.0 m

2c this is run from the router.

Tell me what difference does it make if I choose VLAN instead of enable at the sharing option?

Is there anything out of the ordinary with my account settings?

local

international