Mega100WR - Webserver

[Heinz09]

Hi,

I have encountered a slight error, I have a web server at home that I use for internal web development, but now I want to have the site accessible to me anywhere on the net.

I setup my account with no-ip and now when I go to the url it redirects me to my routers configuration page.

Where do you change the Mega100WR to rather use port 81 then port 80?

I just can't seem to find it.

Thanks in advance;

 

[Turbo_Aspiration]

http://portforward.com/english/routers/port_forwarding/Telkom/Mega-100WR/Echolink.htm

Forward port 80 to the node your webserver is running on.

Note that sometimes accessing your wan ip from within your local network will direct you to your router. After forwarding the port, try accessing from outside the network

 

[Heinz09]

OK, kinda what I want to do, but how the hell do you change the router to be accessed through port 81?

It might be quite a bit safer and "easier".

 

[z3r3]

You don't need to do that if you serve webpages unless you enabled your cfg settings put the web interface onto the WAN interface. Just setup port forwarding to ur PC. Obviously once that is done u can't view it from inside the WAN by going to ur no-ip address that only works externally.

 

[scabs01]

I setup my account with no-ip and now when I go to the url it redirects me to my routers configuration page.

Yeah, i'm having the same issue. Not sure why though. If i go to http://whatismyipaddress.com/ it says that i have two IP addresses and i'm not sure which one to use.

Any ideas.

Thanks

 

[scabs01]

*bump*