need help with router board

[NathanCrow]

2.4 GHz wireless long range with access point


Can anyone tell me what software i use to login to this router board to scan for wireless networks

Only name on the board is "Concraft"


Picture Link http://mybroadband.co.za/photos/showphoto.php?photo=14438&cat=500

 

[portcullis]

That's one of those Senao / Engenius items.

Hold the reset button down for about five seconds and the lights will flash. Point your web browser to 192.168.1.1 and leave the user name and password blank. You'll then be in the unit and you can play to your hearts' content.

If you're thinking of getting rid and replacing with a MikroTik, please think of us. We use them for one of the charities we support.

 

[NathanCrow]

That's one of those Senao / Engenius items.

Hold the reset button down for about five seconds and the lights will flash. Point your web browser to 192.168.1.1 and leave the user name and password blank. You'll then be in the unit and you can play to your hearts' content.

If you're thinking of getting rid and replacing with a MikroTik, please think of us. We use them for one of the charities we support.

Thanks for the info, i gonna use it to connect to Cape Town Wug will this unit work 100% on the wug network.
If i upgrade to Mikro Tik i will donate it no problem.

 

[portcullis]

Thanks for the info, i gonna use it to connect to Cape Town Wug will this unit work 100% on the wug network.
If i upgrade to Mikro Tik i will donate it no problem.

Best you talk to CTWUG about that. As I understand it, their network's 5GHz. I stand corrected on that though.

 

[NathanCrow]

Best you talk to CTWUG about that. As I understand it, their network's 5GHz. I stand corrected on that though.

Hi i have problem on the board is 3 LED's and one ontop of the card.
Using POE 15V 0.8amp the red LED is on and the LED on top of the card is flashing when holding the reset button it flashers faster but when i point my browser 192.168.1.1 nothing happens.

The user manual i downloaded from the net says its a 12V 1amp

Can the POE be the problem

 

[portcullis]

Will it work with 15V properly?

I was under the impression it needs either 12V on the power jack or 48V PoE to work.

 

[NathanCrow]

Hi i manage to access the admin area but have problem now the AP works fine but when i change it to bridge there is no way in the admin to do a scan.

please help

 

[protzkrog]

just get proper mikrotik kit and stop struggling