Openelec & RC6 not working

[Freakboy]

Hey guys,

I just installed Openelec V2 (came from W7+XBMC) and now my remote is not working.
I've got a Microsoft MCE RC6 receiver and a Harmony 650 remote.

Everything worked fine in W7, but now nothing.
I have changed the setting to "remote sends keys" and tried a different USB port, nothing.

IRW command doesn't detect anything even thou the receiver show a red light when I press a button
lsusb displays the following, so the receiver is detected.

root ~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 001 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 002 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 006: ID 0e8f:0022 GreenAsia Inc.

Can anybody give me any advice to get this working.
This is a clean install of Openelec V2 to a USB drive with nothing else messed with.
Any help would be appreciated.

 

[kayvee]

No immediate suggestions, my chinese remote worked out of the box, fortunately. Maybe you will get more help in the openelec forums?

 

[Freakboy]

I have a post there also
Strange thing is that I can wake-up the PC from sleep with the remote, but then nothing afterwards.

 

[Tim the Techxpert]

Hi There,
I asked one of my technical friends for hiss learned insight. He can be a bit short with the information but this is what he said:
IRQ on that BUS is out of SYNC. Instead of using software controlled clock for bus it is using CPU clock which is clearly out of sync ( it can wake-up but nothing else )

I have asked him for info on how to fix it but maybe this helps in the meantime


Warmest regards

Tim