Pool troubles

Sicilian-Najdorf

Well-Known Member
Joined
Aug 27, 2018
Messages
149
Reaction score
37
Hi All
Recently moved into a new house that has a pool.
As a first time pool owner, I am a bit lost.

There are bubbles galore coming into the pool when the pump is on.
I already replaced the pool pump lid which had a hole in it.

What I have noticed:
The weir vacuum lid has a crack in it and doesn't fit snug and keeps coming out - Will replace.

Noticed leaking here:

1718019677693.png



Firstly, what are these specific pipes called?

Can this leaking cause bubbles coming into the pool?


Any advice?


Thank you
 
Any leaks will cause air to be sucked into the system which will then escape into the pool through the return, as you are seeing now..

Replace the suspicious pipes in your pic as a next step to solving the issue..
 
Any leaks will cause air to be sucked into the system which will then escape into the pool through the return, as you are seeing now..

Replace the suspicious pipes in your pic as a next step to solving the issue..
as a next option close in the pool :P its an option too
 
  • Like
Reactions: rh1
Hi All
Recently moved into a new house that has a pool.
As a first time pool owner, I am a bit lost.

There are bubbles galore coming into the pool when the pump is on.
I already replaced the pool pump lid which had a hole in it.

What I have noticed:
The weir vacuum lid has a crack in it and doesn't fit snug and keeps coming out - Will replace.

Noticed leaking here:

View attachment 1723519



Firstly, what are these specific pipes called?

Can this leaking cause bubbles coming into the pool?


Any advice?


Thank you
It may be worth it to replace that entire valve assembly with the leaky pipes, it looks a little worn. That's a pretty quick job for a pool guy and shouldn't be that expensive.
 
Get a friend who knows about pools or hire a service for a while so you can learn if you are uncertain. It could save you money and help save your sanity in the long-run.

A pool is a very costly and time consuming thing to own.
 
Hi All
Recently moved into a new house that has a pool.
As a first time pool owner, I am a bit lost.

There are bubbles galore coming into the pool when the pump is on.
I already replaced the pool pump lid which had a hole in it.

What I have noticed:
The weir vacuum lid has a crack in it and doesn't fit snug and keeps coming out - Will replace.

Noticed leaking here:

View attachment 1723519



Firstly, what are these specific pipes called?

Can this leaking cause bubbles coming into the pool?


Any advice?


Thank you
Those leaks are on the pressure side not the vacuum side, and as such are not the source of your bubbles.

To get bubbles, you're looking for a leak on the suction side. Simplest check is the O-ring on the pump filter basket cover. Beyond that it's not so easy, you're looking at the piping from the weir to the pump.
 
Those leaks are on the pressure side not the vacuum side, and as such are not the source of your bubbles.

To get bubbles, you're looking for a leak on the suction side. Simplest check is the O-ring on the pump filter basket cover. Beyond that it's not so easy, you're looking at the piping from the weir to the pump.

Could the crack in the weir vacuum lid be causing bubbles?
 
Yes fix those leaking pipes first, its relatively cheap and you can do it yourself, just get the right glue and pipes that can handle the pressure. Any place selling pool stuff should have it. Places like Chamberlains should be cheaper than a Pool shop.
Also did you replace the sand? If the sand is very old and dirty it can also cause higher pressure and cause leaks or bubbles. And also big problems to keep the pool clean.
There is also a little breather pipe thingy inside your sand filter that can cause problems and bubbles if it is blocked.
Then that cap on top of your sand filter with lot of screws. When you fit it you do it slowly going up and down with opposite screws, don't screw to tight at first. It is a process getting them all tight slowly going over and over all of them plenty times. If not done correctly you can have a leak or air getting in. Its not difficult but you must take your time and do it properly.
 
Could the crack in the weir vacuum lid be causing bubbles?
If there's somewhere for air to get sucked in, it will cause bubbles.
This also includes cracks in your pool cleaner hose at the surface.

If it's completely submerged (inside the weir) it won't be making bubbles.
 
With my democratic vote, I also vote for the pool to be closed
I used to think that.

Then this happens:
1718024310969.png

Forget about a firepool, having 10kl of reasonably clean water on standby to flush your toilets with and wash your hands with is absolutely invaluable.
 
Top
Sign up to the MyBroadband newsletter
X