Post your 3DMark Vantage Scores here!

[Nokkie]

These are the following default settings for 3dmark Vantage Build 1.0.2. Please bide by the 1stage default settings and if you wish you may change benchmarking performance settings. Just copy and paste below and stage your second set of settings and performance, With a new score and new results.

Always include system information and final 3dmark Vantage scores.


default res: 1280 x 1024
multi sample count: 1
texture filtering: Optimal
maximum anisotropy: 1
loop count: 1
fixed frame rate: 0
texture quality: performance
shadow shader quality: performance
shadow resolution quality: performance
shader quality: performance
post processing scale: 1:2


Happy hunting!

 

[Pada]

Here's a whole thread dedicated to 3DMark Vantage scores: http://www.phforums.co.za/f45/3d-mark-vantage-scores-34631/

Also note that you have to disable PhysX on the 2nd graphics card, so that the CPU would do the PhysX calculations instead.

 

[Terumo]

What a strange way to start a comparative thread, with the OP not posting his own results :wtf:

 

[Nokkie]

its not about me its about the rest of the forumites...

 

[NomNom]

Graphics card: XFX ATI HD4850 512mb
CPU: i5 760

default res: 1280 x 1024
multi sample count: 1
texture filtering: Optimal
maximum anisotropy: 1
loop count: 1
fixed frame rate: 0
texture quality: performance
shadow shader quality: performance
shadow resolution quality: performance
shader quality: performance
post processing scale: 1:2

Not sure if it's good or bad.

 

[Nokkie]

Dude - please stop killing my threads with useless links... what did I ever do to you? For once I would like to say something without someone killing it in the first place. Really man? do you look at every single link on this forum and tell all mybb members that there is already a thread available? then you tell me what is the purpose of mybroadband? So that I must read all the time and never say anything nor state anything? (I am so fed up with this behavior).

Here's a whole thread dedicated to 3DMark Vantage scores: http://www.phforums.co.za/f45/3d-mark-vantage-scores-34631/

Also note that you have to disable PhysX on the 2nd graphics card, so that the CPU would do the PhysX calculations instead.

PS thanks for the tip.

 

[skusku]

Nokkie post us your score.

Here is the link to my score: Q8400,4x Apacer 1GB DDR2 800, Gigabyte ATI 5850, Few HDD's, blah blah blah...
http://3dmark.com/3dmv/2809152

 

[Pada]

Jeesh Nokkie. It's not necessary to go ballistic just because I posted a link to other RSA guys' results...

Here's the best that I've managed to do with 3DMark Vantage 1.0.2 using default settings:
P28469 (GPU 30379 & CPU 23951)

Specs:
Core i7 940 at 3.95GHz (19x 208MHz) @ 1.4V
2x MSI Cyclone GTX 460 OC 1GB at 878/1756/2230 @ 1.025V

 

[Nokkie]

sorry about that -but I sometimes get many replies like this... sorry...

Jeesh Nokkie. It's not necessary to go ballistic just because I posted a link to other RSA guys' results...

Here's the best that I've managed to do with 3DMark Vantage 1.0.2 using default settings:
P28469 (GPU 30379 & CPU 23951)

Specs:
Core i7 940 at 3.95GHz (19x 208MHz) @ 1.4V
2x MSI Cyclone GTX 460 OC 1GB at 878/1756/2230 @ 1.025V

 

[Nokkie]

wow nice score pada - cpu is a bit low I see, but good graphics.

 

[Pada]

Thanks. I can't manage to overclock my i7 940 (Engineering Sample) anything higher than 3.95GHz with HT enabled. I might give it a try once more, because since I've done that benchmark, I've added 2 more fans (to CPU + front of case) - here is how it looks with the side panel taken off.
I can increase the CPU score to 55000 just by letting the 2nd graphics card to the PhysX calculations, which is why the people at Prophecy Forums said that you should disable it.

Btw Nokkie, where are your results

 

[NomNom]

meh seems like my scored is pretty crap

 

[Nokkie]

sweet rig pada.. I'm trying to upload the snapshot to mybroadband pictures but it seems to be "not" responding... unless i'm doing something wrong.

 

[Nokkie]

meh seems like my scored is pretty crap

Nah I don't think so... most avg pc's get around 5000points... 8000 is not to bad at all I still wanna test my old pc Core 2 duo.

 

[nakedpeanut]

meh seems like my scored is pretty crap

It's only really your graphics card that is letting you down.. But it's still better than most

 

[Nokkie]

oky I can't get my pic uploaded so I'm sharing a link from facebook...

here it is....

http://www.facebook.com/photo.php?pid=7687150&l=0661c01fc5&id=784477215

Basically

Intel 980X e edition
0ne Asus ENGTX580
Kingston 6GB Hyper x memory
Windows 7 64bit.
Asus PSTX58DE Mainboard.

btw its without any type of over clocking.

 

[NomNom]

It's only really your graphics card that is letting you down.. But it's still better than most

I'm getting a 6870 soon, so will post a new score till then.

 

[Nokkie]

Sw33t

 

[Pada]

Nokkie: I think your GTX 580 was used with the PhysX stuff, because your CPU score is way too high for that CPU. I would've expected something in the vicinity of 40k for the CPU score without overclocking and about 50k with overclocking to like 4GHz.

I have to say that 25k GPU score is very impressive for a single card without any overclocking!

 

[Nokkie]

thanks pada are there any other settings I should change with 3dmark vantage?

Nokkie: I think your GTX 580 was used with the PhysX stuff, because your CPU score is way too high for that CPU. I would've expected something in the vicinity of 40k for the CPU score without overclocking and about 50k with overclocking to like 4GHz.

I have to say that 25k GPU score is very impressive for a single card without any overclocking!