Power to my CP box?

Otto_Roth

Active Member
Joined
Nov 2, 2007
Messages
54
Reaction score
1
The mistake I made when Vumatel came to install my fiber is the have the cpe box installed on the outside wall inside my garage. Convenient for them but a schlep for me when I then wired it via about 20m of Cat6 to Tenda Router above the TV's etc., in the family room.
Especially when I now, with all the loadshedding wanted to power both units from a Riello 600VA ups I have available inside.
Then thought of using a static POE pair to pipe the 12v through to the garage!
Found a poe injector kit for R49 at DC3 electronics but although I measure 12.03v in the garage, the cpe box does not boot when I plug the power into it!
Can't think that the load will let the power drop so much that the cpe does not boot!!!
Any ideas??
 
Is the CPE PoE? Then it should be 15 or 24V.

Then just get an UltraLAN Mini UPS that supports that and be done with it.

R500-R600.

If it’s not PoE then just buy two Mini UPS. One for the router one for the ONT/CPE.

Mini DC UPS for WI-Fi Routers available to buy online at @TAKEALOT We offer fast, reliable delivery to your door.

These are normally R499 at Makro but they don’t have stock now or not listing online.
 
Found a poe injector kit for R49 at DC3 electronics but although I measure 12.03v in the garage, the cpe box does not boot when I plug the power into it!
Can't think that the load will let the power drop so much that the cpe does not boot!!!
Any ideas??

Did you measure it in-line while the ont is "booting" to see how low it drops?

But in any case, +1 on the suggestions to simply get a mini ups like a gizzu/netology. What is the model number of the cpe in question here?
 
Top
Sign up to the MyBroadband newsletter
X