gripen
Expert Member
Based on my opinion that users are moved in and out of the sucky-speed group, I have formulated a new strategy. Could some people experiencing good speed please post their subnet info.
For example, my IP addresses used today are 66.18.80.83 and 66.18.80.80(which I set statically).
The only way the can manage users or the most likely way is by IP grouping. So my strategy to be attempted is to get a "good" IP and try get a static IP on that subnet and compare performance for the two different IP addresses.
It is a bit of a gamble since they could be using any range of ways to group the addresses not necessarily by subnet. But its worth a try. I have noticed before that speed does change for the same IP address so when this happens you merely reconnect with a new IP address. This could be the reason that you are getting the same IP address when reconnecting. This is probably their means to offset the pool management proposed above.
So please post your thoughts and experiences on this. Also you IP address (or range if you dont wanna give up the address)
for example.. 66.18.80.0 / 255.255.255.0 which means all addresses from 66.18.80.0 to 66.18.80.255
If the above proves to be the situation regarding speed, this can be used as "proof" or "evidence" that Sentech is screwing customers on purpose. This seems highly likely due to the fact that 2 separate people on the same tower are getting highly differing levels of service.
For example, my IP addresses used today are 66.18.80.83 and 66.18.80.80(which I set statically).
The only way the can manage users or the most likely way is by IP grouping. So my strategy to be attempted is to get a "good" IP and try get a static IP on that subnet and compare performance for the two different IP addresses.
It is a bit of a gamble since they could be using any range of ways to group the addresses not necessarily by subnet. But its worth a try. I have noticed before that speed does change for the same IP address so when this happens you merely reconnect with a new IP address. This could be the reason that you are getting the same IP address when reconnecting. This is probably their means to offset the pool management proposed above.
So please post your thoughts and experiences on this. Also you IP address (or range if you dont wanna give up the address)
for example.. 66.18.80.0 / 255.255.255.0 which means all addresses from 66.18.80.0 to 66.18.80.255
If the above proves to be the situation regarding speed, this can be used as "proof" or "evidence" that Sentech is screwing customers on purpose. This seems highly likely due to the fact that 2 separate people on the same tower are getting highly differing levels of service.