Raid 0 help

[LinuxMan]

Hi Guys i built a new rig this week, and wanted to setup RAID0

I am trying to install Win7 64bit.
The raid drivers on the mobo disc keep saying unsigned..
I have tried updating the bios and using the latest raid driver from asus with no luck

Here are the specs:

Mobo: Asus M4A88TD-M Evo/Usb3
CPU: AMD Phenom II X6 1055T 2.8GHz Hex Core

When I try install win7 32bit as a test it accepts the raid driver but then the install crashes..
Am i wasting time, thinking i should wait and just get a Sata3 drive next year as the board supports it.

I ended up just installing Win7 64bit on 1 drive until i can find a driver that work for the raid controller..
If anyone can shed some light that would be great, thanks.

 

[ara]

Have you tried downloading the latest drivers from AMD themselves rather than Asus?

 

[LinuxMan]

im busy looking here is a thread similar to my error, the driver is unsigned:
http://forums.amd.com/game/messageview.cfm?catid=261&threadid=141527&STARTPAGE=2&FTVAR_FORUMVIEWTMP=Linear

It is a sbs850 raid controller

 

[MiY4Gi]

Sata3 won't make your HDD faster, only the bus/cable. You still want RAID0.

Here's a discussion that might help you: http://www.tomshardware.com/forum/132-63-windows-raid

 

[killadoob]

You have obviously set it to raid in the bios?

Have you added both of them to the raid array? Are you sure they are both in good working order?

Raid is fairly simple, go into bios select raid, go add the drives to the array and install windows 7. Newer drivers will need a usb stick with drivers. I don't trust cd's.