Reducing audio distortion on streaming videos

Pada

Executive Member
Joined
Feb 18, 2009
Messages
8,192
Reaction score
6
Location
Stellenbosch
Hi all,

We're having issues at our church when we're streaming live videos that the we have to increase the audio levels on our side with both the PC and Eurodesk (SL3242FX-PRO) mixing console to a point that it distorts badly.

I'm wondering if there is hardware that we can install/use on our side to reduce the distortion - such as an amplified sound card (eg. Asus Xonar Essence Stx Ultra)?

I've already installed my Asus Xonar DX and it made absolutely no audible difference over the onboard sound when we played via the main speakers.

My guess is that the other churches who serve those video streams are to blame for the too soft audio streams?
More detail: They're also streaming the audio in 96/128kbps, and the video at 50fps over HTTP! We're using VLC on our side to playback the video, but I have absolutely no idea what they're using on the other sides to serve it.

Thanks in advance
 
Sound like a problem with the source content. Why don't you contact them?
 
please post links to some of the videos (assuming they are on youtube)
 
I've already tried to ask them to increase the volume on the other side (at the source), but they're to incompetent if you ask me.

It's not YouTube videos, and I don't want to make the URL publicly (which is like http://196.41.xxx.xxx:8000) available and the last issue is that they're not transmitting 24/7 each day of the week either.
If someone is willing to assist, I can PM the link on Thursday at around 6:30 when the video stream would hopefully be up. Otherwise the video stream should also be up on Sunday from 8:00 onwards.
 
No you can't fix audio like that retrospectively without making it sound funky. You need to boost it pre-streaming. Effectively the SNR of the stream that the audio encoder is getting is too low. Afterwards you're just boosting the noise & compression artifacts along with everything else.

You can try cutting @18khz-ish on the mixer, but tbh there isn't much point. Without a solid source its hopeless.

Consumer gear tends to output at a way lower db level than pro equipment. Thats why most mixers have a special port for intended for CD players. Often its at the top right, RCA type connection w/ a dedicated gain. Just be careful with the order of powering up & down. Up, the source needs to be switched on first, down the mixer needs to be switched off first. You can worry about this later though...it won't fix the problem.

Essentially you need to get them to fix it. Its like a grainy cell pic...its fubar.
 
Its like a grainy cell pic...its fubar.

Not if you work for CSI :p

3447.jpg
 
Thanks HavocXphere. That was pretty much what I thought from the beginning.

I'll see if I can get them to increase the volume & quality on their side.
 
Top
Sign up to the MyBroadband newsletter
X