RouterBoard RB912G and WinBox question

K

Kloofvreter

Honorary Master
Joined
Aug 7, 2008
Messages
30,281
Reaction score
1,991
Location
Cape Town
I have purchased a RouterBoard RB912G, as well as antenna, and all accompanying cables. On the enclosure, it says RB911G, but on the RouterBoard circuit board itself it says RB912G. I am assuming this is because the enclosure for both the 911 and 912 are the same one.

Now, WinBox detects the device as RB911G as well. Would this be because of similarities between the two models?
 
Slootvreter said:
I have purchased a RouterBoard RB912G, as well as antenna, and all accompanying cables. On the enclosure, it says RB911G, but on the RouterBoard circuit board itself it says RB912G. I am assuming this is because the enclosure for both the 911 and 912 are the same one.

Now, WinBox detects the device as RB911G as well. Would this be because of similarities between the two models?
Click to expand...

Hi Slootvreter,

Winbox scans on mac layer so it will see all Mikrotik devices on your network.
 
Slootvreter said:
I have purchased a RouterBoard RB912G, as well as antenna, and all accompanying cables. On the enclosure, it says RB911G, but on the RouterBoard circuit board itself it says RB912G. I am assuming this is because the enclosure for both the 911 and 912 are the same one.

Now, WinBox detects the device as RB911G as well. Would this be because of similarities between the two models?
Click to expand...

Do you have the precise model numbers?
 
level-7admin said:
Hi Slootvreter,

Winbox scans on mac layer so it will see all Mikrotik devices on your network.
Click to expand...

Read the question again?

The enclosure is probably the same for both 911 and 912.

Winbox on the other hand should say 912

try ...

Code: 
[[email protected]] > /system resource print
                   uptime: 3h53m56s
                  version: 6.17
               build-time: Jul/18/2014 15:14:29
              free-memory: 7.3MiB
             total-memory: 32.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 43%
           free-hdd-space: 107.2MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 747
         write-sect-total: 55030
               bad-blocks: 0%
        architecture-name: mipsbe
               [B]board-name: RB911G-5HPnD[/B]
                 platform: MikroTik
 
dade said:
Read the question again?

The enclosure is probably the same for both 911 and 912.

Winbox on the other hand should say 912

try ...

Code: 
[[email protected]] > /system resource print
                   uptime: 3h53m56s
                  version: 6.17
               build-time: Jul/18/2014 15:14:29
              free-memory: 7.3MiB
             total-memory: 32.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 43%
           free-hdd-space: 107.2MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 747
         write-sect-total: 55030
               bad-blocks: 0%
        architecture-name: mipsbe
               [B]board-name: RB911G-5HPnD[/B]
                 platform: MikroTik
Click to expand...

I will get this information tonight, as well as a photo of the board itself.

Thanks!
 
911G-5HPnD has 64MB of ram
Can't find any reference to a 912G on their site... weird
Maybe contact their tech support and ask? They're pretty responsive
 
RB912UAG

hah.

But, strangely, also 64MB according to their site.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X