Sentech Rules!!!!!!!!

[aftermath]

Error: Bad key
The test key was not accepted
The speed test results page will only accept results from tests that have a unique key. These keys can only be used once and are given out when a speed test is started. This helps prevent submitting of results that didn't come from a genuine test. This test was not counted.


Possible causes
Using "back" from the results page
Accessing the results page from a favorites link or direct URL entry
The test took too long to complete; each key is only good for a limited time
Solutions
Start tests from the test start page
Select the correct connection type
Make sure you meet the minimum requirements to use this test

 

[Comrade Borris]

err does this have anything to do with the "I'm stoned" topic that was posted and then deleted earlier?

hehehehehe []

 

[aftermath]

And this one was at 6:45am this morning when congestion should be down.

"Aftermath gets ready to reinstate his ISDN account with Tiscali."


MyADSL Local (South African) Speed Test


Your current bandwidth reading is:

41.20kbps

which means you can download at 5.15 KB/sec. from our servers.

 

[antowan]

Perhaps browser security level issue?

He who does not understand the value of war at the right time, cannot comprehend the value of life at any time - Anonymous

 

[malec]

lol, aftermath - if i were i sentech helpdesk employee i would now have told you matter of factly that "that is still above the 4.2KBps that is promised sir ... so i don't know what you are complaining about"

Tower: PTA Sunnyside (36)
Signal: 38%
Package: 128K

 

[aftermath]

Speed test done with browser security level set at low "Defiantely Not Recommended"

MyADSL Local (South African) Speed Test

Your current bandwidth reading is:

57.70kbps

which means you can download at 7.21 KB/sec. from our servers.

 

[regardtv]

The test you ran SHOULD work with Medium security settings just fine ...

So, there's NO chance that the error is due to browser etc etc... It's simply our good friends at SINtech.

************************************************************
The views expressed on this site are my own and NOT those of my employer.

 

[Cerberus]

Aftermath.. I have a few questions for you.
Are you running a patch antenna?
Are you running the old or New Firmware?
what is you SNL to the tower your connecting(see the mysignal latest ver)
And what package are you using(I'm assuming 128k)

Regards
Cerberus