Setup for Ethernet Telkom Router

[clock]

Hi Guys

I am winning the installation battle but need some advice on the following:

1. I have two NIC's installed on a Win2003 server. One will be used for the connection to the server by local machines and the other for connection to the ADSL line for remote users.

2. I would assume that I would plug the the first NIC into the local switch and the other NIC into the Ethernet Router supplied by Telkom (Marconi).

Here's another scenario - can I also plug a cable from the router to the hub to allow each machine on the local network to access ADSL individually. If so, how would I do the router setup

Any help would be appreciated

Thanks

 

[bb_matt]

Plug the DSL router into your local switch and access via the web interface from any of your PC's on your LAN, so long as they are on the same subnet - check your router manual for details.

 

[Darth Garth]

Well you need to route between the two NIC's by bridging them to allow the local machines see the interent.

See below for more info

http://www.practicallynetworked.com/sharing/xp_ics/