TaiwanSilaX
Active Member
- Joined
- Nov 25, 2009
- Messages
- 70
- Reaction score
- 0
I have a Dlink DSL-2760u and i want to setup QoS, but it is completely different to how I setup on my old router Netgear N300.
Add Network Traffic Class Rule
The screen creates a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the rule.
Traffic Class Name:
Rule Order:
Rule Status:
Specify Classification Criteria
A blank criterion indicates it is not used for classification.
Class Interface:
Ether Type:
Source MAC Address:
Source MAC Mask:
Destination MAC Address:
Destination MAC Mask:
Specify Classification Results
Must select a classification queue. A blank mark or tag value means no change.
Assign Classification Queue:
Mark Differentiated Service Code Point (DSCP):
Mark 802.1p priority:
Tag VLAN ID [0-4094]:
Thats what I have to put values in for, i have no idea what to do... please help!
Add Network Traffic Class Rule
The screen creates a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the rule.
Traffic Class Name:
Rule Order:
Rule Status:
Specify Classification Criteria
A blank criterion indicates it is not used for classification.
Class Interface:
Ether Type:
Source MAC Address:
Source MAC Mask:
Destination MAC Address:
Destination MAC Mask:
Specify Classification Results
Must select a classification queue. A blank mark or tag value means no change.
Assign Classification Queue:
Mark Differentiated Service Code Point (DSCP):
Mark 802.1p priority:
Tag VLAN ID [0-4094]:
Thats what I have to put values in for, i have no idea what to do... please help!