So i got bored...

[Dr.G]

and started pushing teh overclock even moar
posting this at 3.7Ghz rock stable

Vcore in BIOS is set to 1.29, max temps on 1 hour of orthos is 45 degrees Celsius
( btw i think a have a good sample as toms hardware needed like 1.4v on the core to get 3.8 Ghz? )

I WANT MOAAAAR lol so close to my first 4Ghz ever i am wondering if i should push it a lil more?

 

[Dark Agent]

and started pushing teh overclock even moar
posting this at 3.7Ghz rock stable

Vcore in BIOS is set to 1.29, max temps on 1 hour of orthos is 45 degrees Celsius
( btw i think a have a good sample as toms hardware needed like 1.4v on the core to get 3.8 Ghz? )

I WANT MOAAAAR lol so close to my first 4Ghz ever i am wondering if i should push it a lil more?

Cheers

Just keep a bucket of water near your PC.

 

[LFX]

that cap is at low res, cant see ***** . . .

 

[Dr.G]

that cap is at low res, cant see ***** . . .

lol took it at 1680x1050 but it mybb's low res limit on uplads

 

[Dr.G]

4Ghz

So i managed 4Ghz @ 1.385 Vcore
But wasn't stable enough to run super pi, all i could manage was a screen shot lol. I know i cant get this chip at 4ghz stable, my guestimate is 1.4 Vcore but i don't want to push it that hard just yet

here, i cropped out the important bit so its clear to read

 

[Dark Agent]

So i managed 4Ghz @ 1.385 Vcore
But wasn't stable enough to run super pi, all i could manage was a screen shot lol. I know i cant get this chip at 4ghz stable, my guestimate is 1.4 Vcore but i don't want to push it that hard just yet

here, i cropped out the important bit so its clear to read

select the program , then screen shot it.

 

[Dr.G]

select the program , then screen shot it.

like this?

 

[Dark Agent]

like this?

Better

so 4000 is a lot for a 2.6
You really doing it I see

 

[Dr.G]

lol of course i am doing it haha
yeah thats like a 65% overclock?

 

[Dark Agent]

Just keep a bucket of water near your PC

am still sticking with this

 

[Browser]

Nice FSB, maybe run a bandwidth test at the highest you can get it to complete, would be interesting to know along with the RAM information.

 

[Juggy]

like this?

If you hold down ALT and then press print screen it captures just the active window.

 

[QX6700RULZ]

Check your temps with realtemp and let me know if there is any difference between the orthos temps

 

[Dr.G]

If you hold down ALT and then press print screen it captures just the active window.

Sweet, didnt know that

Nice FSB, maybe run a bandwidth test at the highest you can get it to complete, would be interesting to know along with the RAM information.

Yeah 1688 is quite high, this mobo says its rated to 1600

Check your temps with realtemp and let me know if there is any difference between the orthos temps

Orthos doesnt give me any temps, at 3.7 full load is around 45 using realtemp. Im only using air so when i go water im sure i could hit 4ghz+.

But i do find that realtemp is most accurate ( i did that tj-max trick )

 

[QX6700RULZ]

What is general room temp ?

Asking because those temps seem incredibly low also which chip do you have as cpu-z shows 8190 and 7300 ?

 

[Dr.G]

i have the e7300 hey, realtemp reports it as 45 but for example pc wizzard reports it as 51